Primers

Self-priming, Series 90G-1K97, 90-97, H90-97, 91-H₂O, 93-H_2_0, 94-H₂O

Number of Components

One

Surfacer/Filler/Patcher

For information, contact Tnemec Technical Services.

Topcoats

Series 1, 21, 27, 46H-413, 66, L69, L69F, N69, N69F, V69, V69F, 73, 104, 113, 114, 115, V115, L140, L140F, N140, N140F, 141, 161, 406, 1028, 1029, 1094, 1095, 1096.
Note: If Series 1 is exterior exposed for one year or more it must be scarified or recoated with itself before topcoating. Scarification or recoating with itself is required if the Series 1 has been exterior exposed for three days or longer and Series 113 is the specified topcoat. Note: Series 115 and V115 require Series 44-900 adhesion promoter when topcoating Series 1. Note: Certain topcoat colors may not provide one coat hiding depending on the method of application. Contact your Tnemec representative. Note: Series 1 requires three days exterior exposure before topcoating with Series 1028 or 1029.

Volume Solids

61.0 ± 2.0% (mixed)

HAPS

Unthinned: 0.79 lbs/gal solids
Thinned 10% (No. 2 Thinner): 1.98 lbs/gal solids
Thinned 10% (No. 3 Thinner): 0.83 lbs/gal solids
Thinned 10% (No. 49 Thinner): 0.79 lbs/gal solids

Volatile Organic Compounds

Unthinned: 2.79 lbs/gallon (334 grams/litre)
Thinned 10% (No. 2 or 3 Thinner): 3.20 lbs/gallon (384 grams/litre)
Thinned 10% (No. 49 Thinner): 2.79 lbs/gallon (334 grams/litre)

Recommended DFT

2.5 to 3.5 mils (65 to 90 microns) per coat. Note: Reference the NSF website at www.nsf.org for details on the maximum allowable DFT.

Theoretical Coverage

978 mil sq ft/gal (24.0 m²/L at 25 microns). See APPLICATION for coverage rates.

Curing Time

Without 44-710

| Temperature †|| To Touch || To Handle || To Topcoat |
| 75°F (24°C) || ¼ hour || 1 ½ hours || 16 hours |
| 65°F (18°C) || ¼ hour || 2 ¾ hours || 16 hours |
| 55°F (13°C) || ¼ hour || 5 hours || 20 hours |
---† 50% Relative Humidity. Note: Refer to product listings on www.nsf.org for specific potable water return to service information. Curing time will vary with surface temperature, humidity, and film thickness. Note: When recoating Series 1 with itself, the minimum recoat time is 2 hours at 70°F (21°C).
Ventilation: When used in enclosed areas, provide adequate ventilation during application and cure.

With 44-710: The use of 44-710 can greatly reduce dry to handle cure times. Note: Series 44-710 Accelerator must be used when the surface temperature falls below 50°F (10°C).