Series 1028T

Enduratone

This product has been discontinued. Please contact your local sales representative for further assistance.

Generic Type

HDP Acrylic Polymer

Common Usage

Water-based, low VOC, High Dispersion Pure acrylic polymer coating providing excellent long term protection in both interior/exterior exposures. Contains ceramic spheres for enhanced thermal stability. May be applied by spray, brush or roller over Aerolon insulative coating systems. It is mildew resistant and exhibits very good gloss and color stability.

Intermediate

Series 971

Volume Solids

46.0 ± 2.0% †

Number of Components

One

Finish

Gloss - Note: Final gloss level of topcoat can vary depending on number of coats applied. One coat will generally result in a lower sheen than two coats of the material.

Volatile Organic Compounds

Unthinned: 0.61 lbs/gallon (73 grams/litre)
Thinned 5%: 0.61 lbs/gallon (73 grams/litre) †

Colors

Refer to Tnemec Color Guide. Note: Certain colors may require multiple coats depending on method of application and finish coat color.

Recommended DFT

2.0 to 3.0 mils (50 to 75 microns) per coat. Important: Do not exceed 3 mils DFT when topcoating Aerolon for personnel protection.

HAPS

Unthinned: 0.27 lbs/gal solids
Thinned 5%: 0.27 lbs/gal solids

Theoretical Coverage

738 mil sq ft/gal (18.1 m²/L at 25 microns). See APPLICATION for coverage rates. †

Curing Time

Temperature To Touch To Handle To Recoat To Resist Moisture
75°F (24°C) 30 minutes 2 hours 2 hours 6 hours

Curing time varies with surface temperature, air movement, humidity and film thickness.

Continue Exploring in the color tool

Close

Color Swatch packet

You can use our Color Tool page to explore our available colors and request swatches of colors you like.

Sorry, there is a maximum of 6 color swatches.

Request swatch packet

Continue Exploring in the color tool

Close