Series 1070
Fluoronar
Generic Type
Advanced Thermoset Solution Fluoropolymer
Common Usage
A high-solids fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and conventional spray application. It has outstanding color and gloss retention even in the most severe exposures. Under certain conditions, it may be used to restore aged fluoropolymer coil applied coatings or for OEM applications. Fluoronar's ultra-durable film tolerates areas on steel plate that are frequently wet or experience standing water and situational immersion. Contact your Tnemec representative for more information.
Special Qualifications
Series 1070 meets the exterior weathering requirements of AAMA 2604 and 2605.
View more product detailsProduct Data Sheets
- English_Series_1070_Fluoronar_pds.pdf
- French_Series_1070_Fluoronar_pds.pdf
- Spanish_Series_1070_Fluoronar_pds.pdf
Safety Data Sheets
Email this productContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Colors
-
This product is available in 502 colors.
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
Curing Time
| Temperature | To Touch | To Handle | Minimum Recoat ‡ |
|---|---|---|---|
| 90°F (32°C) | 30 minutes | 4-6 hours | 6-8 hours |
| 70°F (21°C) | 30 minutes | 6-8 hours | 10-12 hours |
| 50°F (10°C) | 1 hour | 12-15 hours | 16-24 hours |
‡ Maximum recoat: 30 days. Curing time varies with surface temperature, air movement, humidity and film thickness. Note: For faster curing and low-temperature applications, add No. 44-710 Urethane Accelerator; see separate product data sheet.
Primers
Series 1, 27, 27WB, 66, L69, L69F, N69, N69F, V69, V69F, 90-97, H90-97, 91-H₂O, 94-H₂O, 118, 135, 161, 394, 1224. Note: Series 1 and 394 require an intermediate coat prior to topcoating with Series 1070. Note: Series 118 is typically used to overcoat, sound, existing coating systems. See product data sheet for more information.
Volume Solids
60.0 ± 2.0% (mixed) †
Number of Components
Two: Part A and Part B
Volatile Organic Compounds
Unthinned: 2.93 lbs/gallon (351 grams/litre)
Thinned 5% (No. 63 Thinner): 3.10 lbs/gallon (371 grams/litre)
Thinner 8% (No. 63 Thinner): 3.19 lbs/gallon (382 grams/litre)
HAPS
Unthinned: 4.1 lbs/gal solids
Thinned 5% (No. 63 Thinner): 4.1 lbs/gal solids
Thinned 8% (No. 63 Thinner): 4.1 lbs/gal solids
Finish
Gloss
Theoretical Coverage
962 mil sq ft/gal (23.6 m²/L at 25 microns). †
Recommended DFT
2.0 to 3.0 mils (50 to 75 microns) per coat. Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.
Intermediate
Series 73, 750, 1075, 1075U, 1095 (Intermediate coat may be required for some applications, please contact Tnemec.)
Note: When topcoating with Series 1070, the following maximum recoat times apply: Over 27, 66, L69, L69F, N69, N69F, V69, V69F, 135, or 161, 14 days; over itself, 30 days; over 750, 1075, 1075U, 1095, 45 days; over 1 and 394, 60 days; over 73, 90-97, H90-97, 91-H₂O, 94-H₂O, 1224, 90 days.
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep