Series 1070V
Fluoronar
Generic Type
Advanced Thermoset Solution Fluoropolymer
Common Usage
A low VOC, fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and conventional spray application. It has outstanding color and gloss retention even in the most severe exposures. Under certain conditions, it may be used to restore aged fluoropolymer coil applied coatings or for OEM applications. Fluoronar's ultra-durable film tolerates areas on steel plate that are frequently wet or experience standing water and situational immersion. Contact your Tnemec representative for more information.
Special Qualifications
Series 1070V meets the requirements of LEED-Low-Emitting Materials, Collaborative for High Performance Schools-Paints & Coatings, WELL Building Standard-VOC Restrictions, and Living Building Challenge–Healthy Interior Performance. Contact your Tnemec representative for more information.
This product is part of a coating system tested in accordance with ISO 12944-6 (2018). Contact your Tnemec representative for coating system test results.
Series 1070V meets the exterior weathering requirements of AAMA 2604 and 2605.
View more product detailsProduct Data Sheets
- English_Series_1070V_Fluoronar_pds.pdf
- French_Series_1070V_Fluoronar_pds.pdf
- Spanish_Series_1070V_Fluoronar_pds.pdf
Safety Data Sheets
Email this productContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Colors
-
This product is available in 502 colors.
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
Theoretical Coverage
930 mil sq ft/gal (22.8 m²/L at 25 microns) †
Volume Solids
58.0 ± 2.0% (mixed) †
Intermediate
Series 73, 750, 1075, 1075U, 1095 (Intermediate coat may be required for some applications, please contact your Tnemec coating consultant.)
Note: When topcoating with Series 1070V, the following maximum recoat times apply: Over 27, 66, L69, L69F, N69, N69F, V69, V69F, 135 or 161, 14 days; over itself, 30 days; over 750, 1075, 1075U, 1095, 45 days; over 1 and 394, 60 days: over 73, 90-97, H90-97, 91-H₂O, 94-H₂O or 1224, 90 days.
Curing Time
Temperature | To Touch | To Handle | Minimum Recoat ‡ |
---|---|---|---|
90°F (32°C) | 30 minutes | 4-6 hours | 6-8 hours |
70°F (21°C) | 30 minutes | 6-8 hours | 10-12 hours |
50°F (10°C) | 1 hour | 12-15 hours | 16-24 hours |
‡ Maximum recoat: 30 days. Curing time varies with surface temperature, air movement, humidity and film thickness. Note: For faster curing and low-temperature applications, add No. 44-710 Urethane Accelerator; see separate product data sheet.
Number of Components
Two: Part A and Part B
Finish
Gloss
Recommended DFT
2.0 to 3.0 mils (50 to 75 microns) per coat. Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.
Primers
Series 1, 27, 27WB, 66, L69, L69F, N69, N69F, V69, V69F, 90-97, H90-97, 91-H₂O, 94-H₂O, 118, 135, 161, 394, 1224. Note: Series 1 and 394 require an intermediate coat prior to topcoating with Series 1070V. Note: Series 118 is typically used to overcoat, sound, existing coating systems. See product data sheet for more information.
Volatile Organic Compounds
Unthinned: 1.14 lbs/gallon (137 grams/litre)
Unthinned: 0.57 lbs/gallon (69 grams/litre) (TBAc Exempt)
Thinned 10% (No. 63 Thinner): 1.81 lbs/gallon (217 grams/litre)
Thinned 10% (No. 63 Thinner): 1.37 lbs/gallon (164 grams/litre) (TBAc Exempt)
Thinned 10% (No. 65 Thinner): 1.91 lbs/gallon (229 grams/litre)
Thinned 10% (No. 65 Thinner): 0.57 lbs/gallon (69 grams/litre) (TBAc Exempt) †
HAPS
Unthinned: 0.03 lbs/gal solids
Thinned 10% (No. 63 Thinner): 0.03 lbs/gal solids
Thinned 10% (No. 65 Thinner): 0.03 lbs/gal solids
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep