Series 109
ProBond
Generic Type
Low Stress Penetrating Epoxy Sealer
Common Usage
Series 109 ProBond is a lower-temperature curing, thin-film, low-stress, epoxy designed to adhere to a multitude of substrates, including old finishes, and is frequently used as an overcoating primer. Series 109 is solvent-free and is applied at a low film thickness to reduce stress and weight on old tightly adhered coatings creating a foundation to accept high-performance epoxy and polyurethane finishes. Also used, when specified, as the primer under Lavacrete polymer concrete epoxy toppings. Note: Adhesion analysis of old finishes and test patches are recommended before overcoating a structure. Reference the latest version of Tnemec Technical Bulletin 98-10 for more information.
View more product detailsContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Curing Time
| Temperature | To Handle | To Topcoat |
|---|---|---|
| 75°F (24°C) | 18-24 hours | 8-12 hours |
| 50°F (10°C) | 36-48 hours | 24-36 hours |
| 40°F (4°C) | 48-72 hours | 36-48 hours |
ProBond may be topcoated as soon as it has become dry to touch or up to the maximum time to topcoat as listed above. The early-stage application does not denote or imply that the coating is hard enough for handling or moving, or that it has sufficient resistance to staging or equipment damage.
Number of Components
Two: Part A and Part B
Volatile Organic Compounds
Unthinned: 0.15 lbs/gallon (18 grams/litre)
Thinned 2.5% (No. 2 Thinner): 0.32 lbs/gallon (38 grams/litre)
Thinned 5% (No. 2 Thinner): 0.48 lbs/gallon (58 grams/litre)
Finish
High-gloss
Volume Solids
100% (mixed)
Theoretical Coverage
1,584 sq ft/gal (38.8 m²/L at 25 microns). See APPLICATION for coverage rates.
Recommended DFT
1.5 to 2.0 mils (40 to 50 microns)
Topcoats
Series N69, L69, V69, 132, 133, 135, 138, 469, 470, 479, 1028, 1094, 1095, 1096. Note: When topcoating Series 109, a maximum recoat time applies: at 90°F (32°C), 15 days, at 75°F (24°C), 30 days, at 50°F (10°C), 30 days. Note: The following maximum recoat time applies: Series 469, 470, 479, 72 hours; Series 1028, 15 days.
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep