Series 118
Uni-Bond Mastic
Generic Type
Mastic Waterborne Acrylic
Common Usage
A high-build, rust-inhibitive, elastomeric coating formulated for exceptional adhesion and corrosion resistance over minimally prepared aged coating systems. Series 118 is an excellent choice for projects where abrasive blast cleaning of the substrate is not possible and an anti-corrosive coating is needed. Uni-Bond Mastic accepts a variety of high-performance topcoats for the creation of a long-term protective and aesthetic coating system. Coating film can be reinforced and strengthened with a variety of mesh options when dictated by exposure conditions and service environments.
Special Qualifications
Series 118 meets the requirements of LEED-Low-Emitting Materials, Collaborative for High Performance Schools-Paints & Coatings, WELL Building Standard-VOC Restrictions, and Living Building Challenge–Healthy Interior Performance. Contact your Tnemec representative for more information.
View more product detailsContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Volatile Organic Compounds
Unthinned: 0.26 lbs/gallon (31 grams/litre) †
Number of Components
One
Curing Time
| Temperature | To Touch | To Handle | To Recoat |
|---|---|---|---|
| 75°F (24°C) | 30 minutes | 4 hours | 8 hours |
Curing time varies with surface temperature, air movement, humidity and film thickness.
Finish
Matte
Topcoats
Series 30, 72, 73, 700, V700, 701, V701, 740, 750, 1026, 1028, 1029, 1070, 1070V, 1071, 1071V, 1072, 1072V, 1074, 1074U, 1075, 1075U, 1094, 1095 or 1096. Note: Series 118 is not intended to be a finish coat. A topcoat is strongly recommended for aesthetics and avoidance of dirt accumulation.
Recommended DFT
6.0 to 8.0 mils (150 to 205 microns) per coat. Note: Two coats are required over bare steel. Overcoating an aged system that is mostly intact and tightly adhered can be achieved by spot priming prior to applying a full coat.
Theoretical Coverage
882 mil sq ft/gal (21.6 m²/L at 25 microns). See APPLICATION for coverage rates. †
Volume Solids
55.0 ± 2.0% †
HAPS
Unthinned: 0.02 lbs/gal solids
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep