Series 120-5002
Vinester
Generic Type
Novolac Vinyl Ester
Common Usage
A primer designed for superior protection against organic and inorganic acids and sour crude when stored at elevated temperatures in insulated tanks. Sprayable lining for tanks and vessels. Provides splash, spillage and fume protection for structural surfaces and secondary containment. Note: Contact your Tnemec representative or Tnemec Technical Services with specific chemical exposures.
View more product detailsProduct Data Sheets
- English_Series_120_5002_Vinester_pds.pdf
- French_Series_120_5002_Vinester_pds.pdf
- Spanish_Series_120_5002_Vinester_pds.pdf
Safety Data Sheets
Email this productContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Colors
- 5002 Beige Primer
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
Primers
Prepared Bare Concrete and Steel: Self-priming
Topcoats
Series 120-5001
Volume Solids
Theoretical 89% (mixed). Series 120 Vinester system contains a reactive monomer and some loss will occur during application and cure. Actual solids by volume will vary depending upon temperature and air movement. See Practical Coverage Rates.
Volatile Organic Compounds
Unthinned: 0.59 lbs/gallon (71 grams/litre)
Thinned 3%: 0.78 lbs/gallon (93 grams/litre)
Recommended DFT
12.0 to 18.0 mils (305 to 455 microns) per coat (minimum of one coat 5002 primer and one coat 5001 finish coat).
Curing Time
| Temperature | To Handle | To Topcoat | Immersion |
|---|---|---|---|
| 75°F (24°C) | 6 hours | 6 hours min 2 hours max. | 72 hours min. |
Note: Scarification required if maximum time to topcoat is exceeded.
Curing time varies with surface temperature, air movement, humidity and film thickness.
Finish
Semi-gloss
Number of Components
Two: Part A (base) and Part B (catalyst)
Surfacer/Filler/Patcher
Series 215, 217, 252SC ChemBloc (MCK) mortar. Note: The following products can be used as a surfacer, filler, or patcher by mixing with 211-9111 Bulking Additive: Series 120-5002, 251SC, 1402, 1407, 1415, 1416, and 1418. Note: A repair kit of 201, with Part C fumed silica, is available for small patching/surfacing repairs (reference Technical Bulletin 99-22). For more extensive repairs and additional information, contact your Tnemec representative or Tnemec Technical Services.
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep