Series 141
Epoxoline
Generic Type
Modified Polyamine Epoxy
Common Usage
A high-solids lining offering high-build edge protection and long-term durability. Series 141 is abrasion and corrosion-resistant for extended immersion service in crude oil and finished fuels. Used to protect steel and concrete storage tanks, transport tanks, pipelines, and industrial wastewater while increasing service life.
Special Qualifications
Conforms to AWWA C210 (not for potable water contact).
Series 141 conforms to API 652 for lining above-ground storage tanks. Contact your Tnemec representative for additional information.
View more product detailsProduct Data Sheets
- English_Series_141_Epoxoline_pds.pdf
- French_Series_141_Epoxoline_pds.pdf
- Spanish_Series_141_Epoxoline_pds.pdf
Safety Data Sheets
- English_Series_141_Epoxoline_sds.pdf
- French_Series_141_Epoxoline_sds.pdf
- Spanish_Series_141_Epoxoline_sds.pdf
Contact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Colors
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
Theoretical Coverage
1,315 mil sq ft/gal (32.2 m²/L at 25 microns). See APPLICATION for coverage rates. †
Number of Components
Two: Part A (amine) and Part B (epoxy)
Primers
Steel: Self-priming, 1, 27, 37H, L69, L69F, N69, N69F, V69, V69F, 90E-92, 90G-1K97, 90-97, H90-97, 90G-98, 91-H₂O, H91-H2O, 94-H₂O, 135, L140, L140F, N140, N140F, 394
Concrete: Self-priming, 27, L69, L69F, N69, N69F, V69, V69F, L140, L140F, N140, N140F, 215, 217, 218
CMU: Self-priming or Series 130, 215, 218, 1254
Volume Solids
82% ± 2.0% (mixed) †
Volatile Organic Compounds
EPA Method 24
Unthinned: 0.90 lbs/gallon (107 grams/litre)
Thinned 5% (No. 60 Thinner): 1.21 lbs/gallon (145 grams/litre)
Thinned 10% (No. 4 Thinner): 1.45 lbs/gallon (173 grams/litre) †
Recommended DFT
4.0 to 18.0 mils (100 to 455 microns) in a one-coat application. Note: Thickness requirements will vary with the substrate, application method, and exposure. Contact your Tnemec representative.
Topcoats
Exterior: Series 73, 180, 1028, 1029, 1094, 1095, 1096. Note: The following maximum recoat time applies when using Series 1094, 1095, 1096: seven (7) days; Series 73, 180: fourteen (14) days. If this time limit is exceeded, Series 141 must be uniformly scarified prior to topcoating.
HAPS
Unthinned: 1.27 lbs/gal solids
Thinned 5% (No. 60 Thinner): 1.28 lbs/gal solids
Thinned 10% (No. 4 Thinner): 1.95 lbs/gal solids
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep