Series 215
Surfacing Epoxy
Generic Type
Modified Polyamine Epoxy
Common Usage
An advanced generation, 100% solids epoxy filler and surfacer for concrete or steel. Excellent material for surfacing, patching, and filling voids in pitted steel and bug holes and pits in concrete substrates. Generally topcoated with a variety of high-performance epoxies and polyurethanes for use in mild to aggressive exposures.
Special Qualifications
Certified by NSF International in accordance with NSF/ANSI/CAN Std. 61 and the extraction requirements of NSF/ANSI/CAN 600. Series 215 is qualified for interior use on tanks and reservoirs. Reference Tnemec’s certified product listing at www.nsf.org for additional details.
Series 215 meets the requirements of LEED-Low-Emitting Materials, Collaborative for High-Performance Schools-Paints & Coatings, WELL Building Standard-VOC Restrictions, and Living Building Challenge–Healthy Interior Performance. Contact your Tnemec representative for more information.
View more product detailsProduct Data Sheets
- English_Series_215_Surfacing_Epoxy_pds.pdf
- French_Series_215_Surfacing_Epoxy_pds.pdf
- Spanish_Series_215_Surfacing_Epoxy_pds.pdf
Safety Data Sheets
Email this productContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Volatile Organic Compounds
Unthinned: 0.08 lbs/gal solids (10 grams/litre) †
Topcoats
Series 22, FC22, 61, 66, L69, L69F, N69, N69F, V69, V69F, 104, 113, 114, 120-5002, L140, L140F, N140, N140F, 141, 161, 201, 210, 237SC, 239SC, 251SC, 262, 264, 270, 273, 280, 281, 282, 287, 406, 431, 434, 435, 436.
Note: Maximum recoat time for Series 406 is 72 hours.
Volume Solids
100% (mixed) †
Primers
Steel: Self-priming, Series 1, 22, 66, L69, L69F, N69, N69F, V69, V69F, 90-97, H90-97, 90G-1K97, 91-H₂O, H91-H2O, 94-H₂O, L140, L140F, N140, N140F, 161, 201, 394
Concrete: Self-priming, Series 22, 66, L69, L69F, N69, N69F, V69, V69F, L140, L140F, N140, N140F, 161, 201. Note: Primers may be necessary on some applications to minimize or eliminate the potential for outgassing. Note: For potable water mat lay-up system, use fiberglass mat product number S211-0215. For filtration membrane mat lay-up system, please reference the Series 215ML product data sheet.
CMU & Cement Board: Self-priming. Can also be used as a bedding coat for Series 273 Stranlok ML system, use fiberglass mat product number S273-0273C.
Finish
Semi-Gloss
Curing Time
| Temperature | To Touch | Dry Through | Maximum to Recoat ‡ |
|---|---|---|---|
| 95°F (35°C) | 4 hours | 12 hours | 14 days |
| 75°F (24°C) | 10 hours | 24 hours | 21 days |
| 55°F (13°C) | 18 hours | 48 hours | 21 days |
| 45°F (7°C) | 24 hours | 72 hours | 21 days |
| 35°F (2°C) | 32 hours | 96 hours | 21 days |
‡ Note: If the Series 215 surface is exterior exposed for more than seven days, scarification is required before topcoating.
Note: Use "To Touch" cure information for minimum recoat times if succeeding topcoats are spray-applied and "Dry Through" if succeeding topcoats are applied by roller, brush, or trowel.
Recommended DFT
Resurfacer: 1/32” to 1/8” (0.8 mm to 3.2 mm)
Up to 2” with the addition of Series 211 (see Mixing instructions) for filling honeycombs, blow holes, and surface imperfections found in formed concrete surfaces. Larger imperfections may require multiple applications. Bedding coat for mat lay up is typically in the 1/16" range.
Number of Components
Two: Part A and Part B (1 Part A to 1 Part B by volume)
Theoretical Coverage
1,604 mil sq ft/gal (39.4 m²/L at 25 microns). See APPLICATION for coverage rates. †
HAPS
Unthinned: 0.0 lbs/gal solids
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep