Series 215ML
Mat-Reinforced Epoxy Lining
Generic Type
Modified Polyamine Epoxy
Common Usage
Series 215ML is a trowel applied, fiberglass mat reinforced, 100% solids polyamine epoxy used as part of a lining system for potable and non-potable ultra-filtration membrane process, backwash, and neutralization basins.
Special Qualifications
Certified by NSF International in accordance with NSF/ANSI/CAN Std. 61 and the extraction requirements of NSF/ANSI/CAN 600. Series 215ML is qualified for interior use on tanks and reservoirs. Reference Tnemec’s certified product listing at www.nsf.org for additional details.
View more product detailsProduct Data Sheets
- English_Series_215Ml_Mat_Reinforced_Epoxy_Lining_pds.pdf
- Spanish_Series_215Ml_Mat_Reinforced_Epoxy_Lining_pds.pdf
Safety Data Sheets
- English_Series_215Ml_Mat_Reinforced_Epoxy_Lining_sds.pdf
- Spanish_Series_215Ml_Mat_Reinforced_Epoxy_Lining_sds.pdf
Contact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Theoretical Coverage
1,604 mil sq ft/gal (39.4 m²/L at 25 microns). See APPLICATION for coverage rates. †
Curing Time
| Temperature | To Touch | Dry Through | Maximum to Recoat ‡ |
|---|---|---|---|
| 95°F (35°C) | 4 hours | 12 hours | 14 days |
| 75°F (24°C) | 10 hours | 24 hours | 21 days |
| 55°F (13°C) | 18 hours | 48 hours | 21 days |
| 45°F (7°C) | 24 hours | 72 hours | 21 days |
| 35°F (2°C) | 32 hours | 96 hours | 21 days |
‡ Note: If the Series 215ML surface is exterior exposed for more than seven days, scarification is required before topcoating.
Number of Components
Three: Liquids Part A (amine), Part B (epoxy), Fiberglass Reinforcing Mat Part C (S211-0215).
Volume Solids
100% (mixed) †
Surfacer/Filler/Patcher
Self-patching or Series 217, 218
HAPS
Unthinned: 0.0 lbs/gal solids
Primers
Concrete: Series L140F, N140F. Note: Series L140F and N140F have a maximum recoat time of 7 days when topcoating with Series 215ML. If the maximum recoat time is exceeded, the coating surface must be uniformly scarified by abrasive blasting with fine abrasive before application of Series 215ML.
Recommended DFT
60.0 to 80.0 mils (1524 to 2032 microns)
Volatile Organic Compounds
Unthinned: 0.08 lbs/gal solids (10 grams/litre) †
Topcoats
Series 22
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep
Support Documents
Series 215ML Sustainability Information Sheet APP GUIDE_Series 215ML.pdf