Series 289
Enviro-Pox
Generic Type
Waterborne Epoxy
Common Usage
Series 289 is a low ambering, advanced generation, breathable, waterborne epoxy with enhanced UV stability and resistance to yellowing. Series 289 is suitable for both wall and flooring applications and can be applied to green concrete. It has excellent resistance to chemical and solvent exposures and can be used as a primer, topcoat, or standalone sealer.
Special Qualifications
Series 289 meets the requirements of LEED-Low-Emitting Materials, Collaborative for High-Performance Schools-Paints & Coatings, WELL Building Standard-VOC Restrictions, and Living Building Challenge–Healthy Interior Performance. Contact your Tnemec representative for more information.
View more product detailsContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Volume Solids
63.9% unthinned
Curing Time
| Temperature• | To Topcoat | To Place in Service |
|---|---|---|
| 75°F (24°C) | 7-8 hours (minimum) | 12-16 hours |
•Based on 50% relative humidity. Note: Curing time varies with surface temperature, air movement, humidity, and film thickness. Application in high-humidity conditions may increase curing time.
Floor/Horizontal Applications: If more than 72 hours have elapsed between coats, the coated surface must be mechanically abraded before topcoating. All surfaces must be clean, dry and free of contaminates. Curing time varies with surface temperature, air movement, humidity, and film thickness.
Wall/Vertical Applications: If more than six (6) months have elapsed between coats, the coated surface must be mechanically abraded before topcoating. All surfaces must be clean, dry and free of contaminates. Curing time varies with surface temperature, air movement, humidity, and film thickness.
Finish
Satin
Surfacer/Filler/Patcher
Series 130, 215, N218, 1254. Note: Series 211-0211 fumed silica can be added to 289 for small patching/surfacing repairs. For more extensive repairs and additional information, contact your Tnemec representative or Tnemec Technical Services.
Primers
Concrete: Self-priming
CMU: Self-priming over filled CMU
Wall Board, Wood & Drywall: Self-priming, Series 151
Note: The following recoat times apply: Series 151, @2 months@.
Recommended DFT
Primer, Intermediate, or Topcoat: 2.0 to 12.0 mils (50-305 microns) per coat. Note: When applied as a clear finish, Series 289 must be applied at a maximum dry film thickness of 5 mils (125 microns) or less to ensure clarity of the product.
Volatile Organic Compounds
0.08 lbs/gal (9.56 g/L)
Theoretical Coverage
1027 mil sq ft/gal (25.2 m²/L at 25 microns). See APPLICATION for coverage rates. †
Number of Components
Two: Part A (Amine), Part B (Epoxy)
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep