Series 335
Tank Armor
Generic Type
Polyamine Epoxy
Common Usage
Internally reinforced, 100% solids epoxy lining that provides protection against corrosion and chemical attack. Specified for use as a protective lining in finished fuels, sweet/sour crude, and brine immersion exposures for above-ground and transport tanks, and pipelines. Series 335 provides long-term durability and corrosion control for extended service life. Also recommended as a liner for tanks and transports containing DEF (Diesel Exhaust Fluid). Contact Tnemec for more information.
Special Qualifications
Series 335 conforms to API 652 for lining above ground storage tanks.
View more product detailsProduct Data Sheets
- English_Series_335_Tank_Armor_pds.pdf
- French_Series_335_Tank_Armor_pds.pdf
- Spanish_Series_335_Tank_Armor_pds.pdf
Safety Data Sheets
Email this productContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Volatile Organic Compounds
Unthinned: 0.10 lbs/gallon (11 grams/litre)
Theoretical Coverage
1,604 mil sq ft/gal (39.4 m²/L at 25 microns). See APPLICATION for coverage rates.
Finish
Semi-gloss
Primers
Self-priming or Series 61, N69F, 161. Note: For surfaces with light to moderate pitting, priming the surface prior to the Series 335 application may help to prevent holidays in the cured film. Note: The following maximum recoat times apply when topcoating with Series 335; Series 61, 14 days; Series N69F and 161, 30 days. If this time limit is exceeded, or if Series N69F or 161 is exterior exposed more than 14 days, the primer must be uniformly scarified prior to topcoating. Note: Series N69F or 161 are for crude oil service only.
Number of Components
Two: Three Part A (epoxy) to One Part B (amine)
Recommended DFT
20.0 to 50.0 mils (500 to 1,270 microns), one coat with multiple passes. Note: Series 335 can be applied to an optional high build thickness of 60.0 mils in a single coat to horizontal surfaces.
Volume Solids
100% (mixed)
HAPS
Unthinned: 0.00 lbs/gal solids
Curing Time
Temperature | To Touch | To Handle | Immersion |
---|---|---|---|
95°F (35°C) | 1/2 hour | 2 hours | 16 hours |
75°F (24°C) | 3/4 hour | 4 hours | 1 day |
55°F (13°C) | 3 hours | 16 hours | 6 days |
35°F (2°C) | 5 hours | 24 hours | 12 days |
Note: The above cure schedule provides for immersion service, temporary or full storage of recommended chemical exposures below 100°F (38°C). For temperature service >100°F (38°C), consult your Tnemec representative or Tnemec Technical Services. Note: If more than 24 hours have elapsed between coats, the Series 335 coated surface must be mechanically abraded before topcoating.
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep