Series 350
Tank Armor
Generic Type
Modified Phenolic Epoxy
Common Usage
A high-build, tightly cross-linked, high-performance epoxy with excellent resistance to a broad range of chemicals, solvents, and petroleum over a wide range of temperatures. Refer to the Series 350 Chemical Resistance Guide for more information.
Special Qualifications
Series 350 conforms to API 652 for lining above ground storage tanks.
View more product detailsProduct Data Sheets
- English_Series_350_Tank_Armor_pds.pdf
- French_Series_350_Tank_Armor_pds.pdf
- Spanish_Series_350_Tank_Armor_pds.pdf
Safety Data Sheets
Email this productContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Colors
- 1232 Tank Armor Blue
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
Primers
Self-priming or Series 61, N69F, 161. Note: For surfaces with light to moderate pitting, priming the surface prior to the Series 350 application may help to prevent holidays in the cured film. Note: The following maximum recoat times apply when topcoating with Series 350; Series 61, 14 days; Series N69F and 161, 30 days. If this time limit is exceeded, or if Series N69F or 161 is exterior exposed more than 14 days, the primer must be uniformly scarified prior to topcoating. Note: Series N69F or 161 are for crude oil service only.
Recommended DFT
20.0 to 40.0 mils (508 to 1,016 microns) one coat with multiple passes.
Curing Time
| Temperature | To Touch | To Handle | Immersion |
|---|---|---|---|
| 75°F (24°C) | 3 hours | 4 hours | 24 to 36 hours |
These times are based on a 20.0 mil (500 micron) dry film thickness. Higher film thicknesses, insufficient ventilation or cooler temperatures will require longer cure times. This coating commonly develops an amine-blush during cure. While this condition will not adversely affect performance of the coating, this blush must be removed by aggressive sweep blasting before applying additional coats. During high humidity conditions, it is recommended that the application be done while the temperatures are increasing. Cure time to achieve a minimum Shore D Hardness of 77 or Barcol GYZJ 935 hardness of 55 for immersion service is 24 to 36 hours. In order to obtain an accurate reading, the minimum DFT must be 30 mils.
Surfacer/Filler/Patcher
Series 351
Number of Components
Two: Three Part A (epoxy) to One: Part B (amine)
HAPS
0 lbs/gal solids
Theoretical Coverage
1,604 mil sq ft/gal (39.4 m²/L at 25 microns). See APPLICATION for coverage rates.
Volume Solids
100%
Finish
Semi-gloss
Volatile Organic Compounds
0.19 lbs/gallon (23 grams/litre)
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep