Series 431
Perma-Shield PL
Generic Type
Modified Polyamine Ceramic Epoxy
Common Usage
A 100% solids, abrasion-resistant lining specifically designed for wastewater immersion and fume environments and exposure to corrosive soils. Provides low permeation to H2S gas, protects against MIC and provides chemical resistance to steel, ductile iron pipe and fittings for severe wastewater or buried exposures. A coal-tar free, resin-rich formulation with low pigment volume concentration (PVC) for maximum performance.
Special Qualifications
Contains 20% ceramic microspheres for increased abrasion resistance. Compatible with high-velocity jet sewer cleaning (hydrocleaning) with 0-degree tips (Reference Technical Bulletin No. 11-86).
Meets the performance requirements of AWWA C 210 (not for potable water contact).
Product Data Sheets
- English_Series_431_Perma_Shield_Pl_pds.pdf
- French_Series_431_Perma_Shield_Pl_pds.pdf
- Spanish_Series_431_Perma_Shield_Pl_pds.pdf
Safety Data Sheets
Email this productContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Colors
- 5024 Sewer Pipe Green
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
Primers
Self-priming, Series 61 or N140. Note: Self-priming or Series 61 is recommended for use in mesophilic anaerobic digesters and other severe exposures. Note: Series 431 must be applied to the Series 61 or N140 within 7 days. Scarify the surface with fine abrasive before topcoating if this maximum recoat window is exceeded. Contact your Tnemec representative for more information.
Volume Solids
100% (mixed)
Recommended DFT
Carbon Steel: 30.0 to 50.0 mils (760 to 1270 microns) in one or more coats.
Ductile Iron: 40 mils (1015 microns) (nominal) in one or more coats.
Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Use Series 44-721 to increase film build. Amounts vary by kit size, refer to the Series 44-721 product data sheet. Contact your Tnemec representative for more information.
Curing Time
| Temperature | Set to Touch | Max. Recoat | To Place in Service |
|---|---|---|---|
| 90°F (32°C) | 1-2 hours | 7 days | 24 hours |
| 75°F (24°C) | 2-3 hours | 7 days | 2 days |
| 55°F (13°C) | 8-9 hours | 7 days | 3 days |
Note: If more than 7 days have elapsed between coats, the Series 431 coated surface must be mechanically abraded (scarified) before topcoating. Curing time will vary with surface temperature, air movement, humidity and film thickness.
HAPS
0.00 lbs/gal solids
Finish
Gloss
Theoretical Coverage
1,604 mil sq ft/gal (39.4 m²/L at 25 microns). See APPLICATION section for coverage rates.
Number of Components
Two: Part A (amine) and Part B (epoxy)
Volatile Organic Compounds
EPA Method 24: 0.19 lbs/gallon (23 grams/litre)
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep
Support Documents
APP GUIDE_Series 431 Perma-Shield Pl Perma-Shield Brochure (BROPS).pdf