Series 61
Tneme-Liner
Generic Type
Cycloaliphatic Amine Epoxy
Common Usage
Tightly cross-linked epoxy with excellent corrosion and chemical resistance. Principally used for immersion services, including fuel and crude oil storage, fuel pipelines, pressure vessels, chemical containment and wastewater treatment.
Special Qualifications
A two-coat system of Series 61 at 4.0 to 6.0 dry mils (100-150 dry microns) per coat passes the performance requirements of MIL-PRF-4556F. Series 61 conforms to API 652 for lining above ground storage tanks.
View more product detailsProduct Data Sheets
- English_Series_61_Tneme_Liner_pds.pdf
- French_Series_61_Tneme_Liner_pds.pdf
- Spanish_Series_61_Tneme_Liner_pds.pdf
Safety Data Sheets
Email this productContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Volume Solids
82.0 ± 2.0% (mixed) †
Topcoats
Note: Series 61 can be topcoated with select Tank Armor linings depending on service conditions. Contact Tnemec Technical Service for recommendations.
Note: To minimize pinhole formation in the topcoat, it is recommended that the concrete substrate be fully resurfaced, and/or primed prior to topcoat application.
Finish
Semi-gloss
Curing Time
| Temperature | To Handle | To Recoat | Immersion |
|---|---|---|---|
| 75°F (24°C) at 4.0 mils 100 microns) | 6 hours | 16-18 hours• | 5 to 7 days |
| 75°F (24°C) at 12.0 mils 305 microns) | 11 hours | 16-18 hours• | 5 to 7 days |
Curing time varies with surface temperature, air movement, humidity, and film thickness.
• Maximum recoat time with itself is 7 days. Extended maximum recoat time of 14 days is allowed when used as a primer for Tank Armor products. If recoat time is exceeded, the coated surface must be scarified before topcoating.
Number of Components
Two: Part A (amine) and Part B (epoxy)
Recommended DFT
- For JP-4, JP-5, JP-8, Aviation Gas and Jet A-1: 4.0 to 6.0 mils (100 to 150 microns) per coat (minimum of two coats).
- Most Other Applications: 8.0 to 12.0 mils (205 to 305 microns) per coat (minimum of two coats). Contact your Tnemec representative for specific recommendations.
HAPS
Unthinned: 1.53 lbs/gal solids
Thinned 10%: 2.42 lbs/gal solids
Volatile Organic Compounds
EPA Method 24
Unthinned: 0.36 lbs/gallon (45 grams/litre)
Thinned 6%: 0.71 lbs/gallon (85 grams/litre)
Thinned 10%: 1.21 lbs/gallon (145 grams/litre) †
Theoretical Coverage
1,315 mil sq ft/gal (32.3 m²/L at 25 microns). See APPLICATION for coverage rates. †
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep