Series N222FC
Deco-Tread FC
Generic Type
Modified Polyamine Fast-Cure Epoxy
Common Usage
A multi-purpose epoxy floor coating that can be used as a primer, broadcast, slurry/broadcast, mortar, grout coat, and topcoat. Excellent application properties with good flow and self-leveling characteristics. Protects concrete surfaces from impact, abrasion and mild chemicals. Series N222FC replaces Series 238 Power-Tread FC.
View more product detailsContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Theoretical Coverage
1,604 mil sq ft/gal (39.4 m²/L at 25 microns). See APPLICATION for coverage rates.
Number of Components
Two: Part A and Part B
Volatile Organic Compounds
0.20 lbs/gal (24 grams/litre)
Recommended DFT
Primer: 6.0 to 12.0 (150-305 microns) per coat.
Broadcast: 1/16" to 1/8" (double broadcast or slurry broadcast required to achieve 1/8")
Mortar: 3/16" to 1/4” (minimum of 1/8”, maximum of 1”)
Grout coat: 8.0 to 16.0 mils (203 to 406 microns)
Intermediate or Topcoat: 8.0 to 16.0 mils (203 to 406 microns)
HAPS
0.01 lb/gallon solids
Volume Solids
100 ± 2% (mixed)
Topcoats
Series N222, N222FC, 230ESD, 233, 247, 248, 249ESD, 256, 257, 280, 280FC, 281, 282, N284, N285, 286, V290, V295, 296, 297. Note: If Series 247, 248, 249ESD, N285, V290, V295, 296, or 297 is selected for the finish coat, an intermediate coat of Series N284 is required. Note: Series N222FC must be broadcast to refusal with silica sand, colored quartz, or flake prior to topcoating with Series 256 or 257.
Curing Time
| Temperature | To Topcoat/Broadcast | To Place in Service |
|---|---|---|
| 75°F (24°C) | 4 to 8 hours | 16 hours |
Note: If more than 8 hours have elapsed between coats, the coated surface must be mechanically abraded before topcoating. Note: There is no maximum recoat time if aggregate has been broadcast to refusal into the preceding coat. Curing time varies with surface temperature, air movement, humidity and film thickness.
Surfacer/Filler/Patcher
Series 206, 215 or the following products mixed with fumed silica: Series 201, N222FC. Note: A repair kit of 201 with Part C fumed silica (TK 201-0001) is available for small patching/surfacing repairs. For more extensive repairs and additional information, contact your Tnemec representative or Tnemec Technical Services.
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep