Series N223

Deco-Trowel

Generic Type

Colored Quartz-Filled Modified Polyamine Epoxy

Common Usage

A low ambering, multi-purpose epoxy coating with enhanced UV stability and resistance to yellowing. Series N223 is a decorative mortar floor-topping system installed at 3/16” to 1/4” thickness. It protects concrete surfaces from impact and abrasion and has excellent chemical resistance with an aesthetically pleasing appearance.

Special Qualifications

Series N223 meets the requirements of LEED-Low-Emitting Materials, Collaborative for High-Performance Schools-Paints & Coatings, WELL Building Standard-VOC Restrictions, and Living Building Challenge–Healthy Interior Performance. Contact your Tnemec representative for more information.

View more product details

Theoretical Coverage

1,604 mil sq ft/gal (39.4 m²/L at 25 microns). See APPLICATION for coverage rates.

Recommended DFT

Suggested 3/16" to 1/4”

Number of Components

Two Liquids: Part A and Part B (2 Parts A to 1 Part B by volume).
Colored Quartz: Series 223 Part C colored quartz (ChromaQuartz) is available from Tnemec or can be purchased from a different supplier.

Curing Time

Temperature To Topcoat To Place in Service
75°F (24°C) 12 to 72 hours 24 hours

Note: If more than 72 hours have elapsed between coats, the coated surface must be mechanically abraded before topcoating. Curing time varies with surface temperature, air movement, humidity and film thickness.

Surfacer/Filler/Patcher

Series 206, 215. Note: A repair kit of 201, with Part C fumed silica or Series N223 with fumed silica, is available for small patching/surfacing repairs. For more extensive repairs and additional information, contact your Tnemec representative or Tnemec Technical Services.

Finish

Gloss. Decorative quartz—multi-colored appearance. The finished appearance and texture depend on the type, film thickness, and the number of clear finish coats selected.

Volatile Organic Compounds

Unthinned: 0.13 lbs/gallon (15 grams/litre)

Primers

Concrete: Self-priming or Series 201, 208, 233, 237, 238, 241.

Volume Solids

100% (mixed)

Topcoats

Series 247, 248, N284, N285, 296. Note: If Series 247, 248, N285, or 296 is selected for the finish coat, an intermediate coat of Series N284 is required (may require two coats).

Still have questions? Request the information you’re looking for:

Request Info

How to Purchase

Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep

Continue Exploring in the color tool

Close

Color Swatch packet

You can use our Color Tool page to explore our available colors and request swatches of colors you like.

Sorry, there is a maximum of 6 color swatches.

Request swatch packet

Continue Exploring in the color tool

Close