Series V115
Uni-Bond DF
Generic Type
Self-crosslinking Hydrophobic Acrylic
Common Usage
A high-performance, versatile coating appropriate for a variety of uses including:
Exterior Steel: Waterborne, rust-inhibitive coating with excellent adhesion to organic zinc-rich coatings. Used as a primer, intermediate or finish coat on tanks, vessels and other industrial and architectural metal substrates.
Humid Environments: Primer/finish for two coat applications over prepared galvanized steel and organic zinc-rich coatings in wet, temperature-controlled exposure areas.
Dry Interior Environments: One or two coat, flash-rust and corrosion resistant primer/finish for overheads. Use on prepared carbon and galvanized steel, aluminum, wood and concrete decks, beams, joists and HVAC.
Note: Uni Bond DF's "dry-fall" characteristics help reduce the potential for overspray problems on buildings and surrounding property.
Special Qualifications
Series V115 meets the requirements of LEED-Low-Emitting Materials, Collaborative for High Performance Schools-Paints & Coatings, WELL Building Standard-VOC Restrictions, and Living Building Challenge–Healthy Interior Performance. Contact your Tnemec representative for more information.
View more product detailsProduct Data Sheets
- English_Series_V115_Uni_Bond_Df_pds.pdf
- French_Series_V115_Uni_Bond_Df_pds.pdf
- Spanish_Series_V115_Uni_Bond_Df_pds.pdf
Safety Data Sheets
Email this productContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Volume Solids
45.0 ± 2.0% †
Intermediate
Series V115 may be used as an intermediate coat over 1, 90-97, 91-H₂O, 94-H₂O or 394. Series 44-900 Adhesion Promoter must be used when topcoating Series 1 or 394 with Series V115.
Topcoats
Series 113, 114, 156, 157, 180, 181, 1026, 1028 or 1029. Note: When Series V115 is applied over 90-97, 90G-1K97, 91-H₂O or 94-H₂O, only Series 1028 or 1029 can be used as topcoats.
Curing Time
Temperature | To Handle | To Recoat |
---|---|---|
75°F (24°C) | 3 hours | 4 hours |
Curing time varies with surface temperature, air movement, humidity and film thickness.
Primers
Steel: Self-priming or Series 1, 27, 66, 90E-92, 90-97, 90G-1K97, 91-H₂O, 94-H₂O, 135, 161, 394.
Concrete: Self-priming only.
Volatile Organic Compounds
Unthinned: 0.81 lbs/gallon (98 grams/litre)
Thinned 5%: 0.81 lbs/gallon (98 grams/litre) †
HAPS
Unthinned: 0.01 lbs/gal solids
Thinned 5%: 0.01 lbs/gal solids
Theoretical Coverage
723 mil sq ft/gal (17.7 m²/L at 25 microns). See APPLICATION for coverage rates. †
Number of Components
One
Recommended DFT
2.0 to 4.0 mils (50 to 100 microns) per coat.
Finish
Eggshell
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep