Series V69
Hi-Build Epoxoline II
Generic Type
Polyamidoamine Epoxy
Common Usage
An advanced generation epoxy formulated for the protection of steel, concrete, and ductile iron substrates. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals and concentrations. This product can also be used for lining storage tanks that contain demineralized, deionized or distilled water.
View more product detailsProduct Data Sheets
- English_Series_V69_Hi_Build_Epoxoline_Ii_pds.pdf
- French_Series_V69_Hi_Build_Epoxoline_Ii_pds.pdf
- Spanish_Series_V69_Hi_Build_Epoxoline_Ii_pds.pdf
Safety Data Sheets
Email this productContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Colors
-
This product is available in 500 colors.
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
Primers
Steel: Self-priming or Series 1, 27, 27WB, 37H, 66, L69, L69F, N69, N69F, V69F, 90E-92, 90-97, H90-97, 90G-1K97, 90-98, 91-H₂O, 94-H₂O, 135, 161, 394, V530
Galvanized Steel and Non-Ferrous Metal: Self-priming or Series 66, L69, L69F, N69, N69F, V69F, 161
Concrete: Self-priming or Series 27WB, 130, 1254
CMU: Self-priming or 130, 1254
Topcoats
Series 22, 27WB, 46H-413, 66, L69, L69F, N69, N69F, V69, V69F, 72, 73, 104, 113, 114, 118, 141, 156, 157, 161, 180, 181, 262, 265, 287, 446, 740, 750, 1026, 1028, 1029, 1070, 1070V, 1071, 1071V, 1072, 1072V, 1074, 1074U, 1075, 1075U, 1077, 1078, 1078V, 1080, 1081, 1094, 1095, 1096, 1224. Note: The following recoat times apply for Series V69: Immersion Service—Surface must be scarified after 60 days. Atmospheric Service—After 60 days, scarification or an epoxy tie-coat is required. When topcoating with Series 740 or 750, recoat time for V69 is 21 days for atmospheric service. Contact your Tnemec representative for specific recommendations.
Volatile Organic Compounds
Unthinned: 1.95 lbs/gallon (234 grams/litre)
Thinned 2.5% (No. 4 Thinner): 2.08 lbs/gallon (250 grams/litre) †
Recommended DFT
2.0 to 10.0 mils (50 to 255 microns) per coat. Note: The number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.
HAPS
Unthinned: 2.05 lbs/gal solids
Thinned 2.5% (No. 4 Thinner): 2.30 lbs/gal solids)
Finish
Satin
Number of Components
Two: Part A (amine) and Part B (epoxy) — One (Part A) to one (Part B) by volume.
Surfacer/Filler/Patcher
215, 217, 218
Volume Solids
67.0 ± 2.0% (mixed) †
Theoretical Coverage
1,074 mil sq ft/gal (26.4 m²/L at 25 microns). See APPLICATION for coverage rates. †
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep