Series 27 | F.C. Typoxy

• Uses Intermediate Coats, Primer and/or Block Fillers, Original Equipment Manufacturer (OEM)
• For Steel, Other
• Generic Description Polyamide Epoxy
• Finish Flat

Versatile low-temperature coating ideally suited for steel fabrication and OEM applications. Also widely used as a field tie-coat. Provides fast curing and rapid handling capabilities.

Series 27WB | Typoxy

• Uses Intermediate Coats, Primer and/or Block Fillers, Original Equipment Manufacturer (OEM)
• For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
• Generic Description Inorganic Hybrid Water-Based Epoxy
• Finish Satin

A unique, low odor, low VOC, water-based epoxy coating featuring HydroLink curing technology for exceptional durability and corrosion resistance. Used for the protection and finishing of steel and concrete structures including structural steel, tanks, pipes, and equipment. Superior wetting for marginally prepared steel and tightly adhered existing coatings. This coating is ideally suited for steel fabrication and OEM applications, with fast-curing and rapid handling properties. Series 27WB exhibits low yellowing and good color stability in whites and light tone colors. Formula protected under U.S. patent.

Series 48 | Multi-Purpose Epoxy

• Uses Intermediate Coats, Primer and/or Block Fillers, Original Equipment Manufacturer (OEM)
• For Steel, Masonry & Stucco, Concrete
• Generic Description Polyamide Epoxy
• Finish Flat

A multi-purpose epoxy coating with fast-cure and low temperature application properties. An excellent choice for shop and field application when rapid curing for fast turn-around is needed. Can be applied to a variety of substrates including steel, concrete, and CMU, as well as previously painted surfaces. Accepts a range of primers and topcoats for complete system selection.

Series 49 | Multi-Purpose Epoxy

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete
• Generic Description Modified Polyamine Epoxy
• Finish Semi-gloss. Gloss can vary with texture, porosity of substrate and thickness of film.

A high-solids, low VOC epoxy coating used for a multitude of primer and topcoat applications. The tough, abrasion-resistant film of Series 49 provides durable protection to concrete, CMU, and steel, and it is immersion grade, making it an excellent choice for non-potable service environments. Excellent adhesion properties allow for use on marginally prepared surfaces when blast cleaning is not possible.

Series 66 | Hi-Build Epoxoline

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
• Generic Description Polyamide Epoxy
• Finish Satin

Industry standard for epoxy coatings for over 40 years. Known for its forgiving application characteristics in adverse and varied conditions, and for benchmark performance.

Series 66HS | Hi-Build Epoxoline

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Polyamide Epoxy
• Finish Satin

• Product is made to order for specific projects. Contact your Tnemec Representative for additional information.

A high-solids, low VOC, pure polyamide epoxy that offers exceptional protection to a variety of substrates in atmospheric and immersion environments. Applied as a primer, intermediate, or topcoat, this versatile coating also accepts a wide-range of finish coats, allowing for a coating system tailored to specific exposure conditions.

Series L69 | Hi-Build Epoxoline II

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Polyamidoamine Epoxy
• Finish Satin

A versatile, low VOC epoxy for protection and finishing of steel and concrete. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals. This product can also be used for lining storage tanks that contain demineralized, deionized, or distilled water. Can serve as a block filler on cementitious or masonry substrates.

Series L69F | Hi-Build Epoxoline II

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Polyamidoamine Epoxy
• Finish Satin

A versatile, low VOC, factory-accelerated epoxy for protection and finishing of steel and concrete. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals.

Series N69 | Hi-Build Epoxoline II

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Polyamidoamine Epoxy
• Finish Satin

An advanced generation epoxy for protection and finishing of steel and concrete in commercial, industrial and marine environments. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals. This product can also be used for lining storage tanks that contain demineralized, deionized or distilled water.

Series N69F | Hi-Build Epoxoline II

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Polyamidoamine Epoxy
• Finish Satin

An advanced generation epoxy for the protection and finishing of steel and concrete. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals. This product can also be used as a block filler on cementitious or masonry substrates.

Series V69 | Hi-Build Epoxoline II

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Polyamidoamine Epoxy
• Finish Satin

An advanced generation epoxy for protection and finishing of steel and concrete. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals. This product can also be used for lining storage tanks that contain demineralized, deionized or distilled water.

Series V69F | Hi-Build Epoxoline II

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Polyamidoamine Epoxy
• Finish Satin

An advanced generation epoxy for the protection and finishing of steel and concrete. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals. This product can also be used as a block filler on cementitious or masonry substrates.

Series 73 | Endura-Shield

• Uses Intermediate Coats, Original Equipment Manufacturer (OEM), Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Aliphatic Acrylic Polyurethane
• Finish Semi-gloss

A coating for commercial, industrial, and marine applications that is highly resistant to abrasion, wet conditions, corrosive fumes, chemical contact and has excellent resistance to exterior weathering. Direct-to-Metal capability allows for a labor-saving, high-build, single coat application.

Series 104 | H.S. Epoxy

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete
• Generic Description Cycloaliphatic Amine Epoxy
• Finish Semi-gloss. Gloss can vary with texture, porosity of substrate and thickness of film.

Versatile coating applies up to 10 mils per coat on steel or concrete. Protects in immersion, salt spray and chemical exposures. Superior abrasion- and stain-resistance.

Series 113 | H.B. Tneme-Tufcoat

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
• Generic Description Waterborne Acrylic Epoxy
• Finish Satin

High performance coating suitable for concrete, steel and other commonly used building materials. Features include high-build, low odor, non-yellowing white and fade resistant colors; easy cleanup and stain-, abrasion-, chemical- and moisture-resistance. Good exterior performance.

Series 114 | H.B. Tneme-Tufcoat

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
• Generic Description Waterborne Acrylic Epoxy
• Finish Gloss

High performance gloss coating suitable for concrete, steel and other commonly used building materials. Features include high-build, low odor, non-yellowing white and fade resistant colors; easy cleanup and stain-, abrasion-, chemical- and moisture-resistance. Good exterior performance.

Series 115 | Uni-Bond DF

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Concrete, Other
• Generic Description Self-crosslinking Hydrophobic Acrylic
• Finish Eggshell

A high-performance, versatile coating appropriate for a variety of uses including: Exterior Steel: Waterborne, rust-inhibitive coating with excellent adhesion to zinc-rich coatings. Used as a primer, intermediate and finish coat on tanks, vessels and other industrial and architectural metal substrates. Humid Environments: Primer/finish for two coat applications over prepared galvanized steel and zinc-rich coatings in wet, temperature-controlled exposure areas. Dry Interior Environments: One or two coat, flash-rust and corrosion resistant primer/finish for overheads. Use on prepared carbon and galvanized steel, aluminum, wood and concrete decks, beams, joists and HVAC. Note: Uni-Bond DF's "dry-fall" characteristics help reduce the potential for overspray problems on buildings and surrounding property.

Series V115 | Uni-Bond DF

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Concrete, Other
• Generic Description Self-crosslinking Hydrophobic Acrylic
• Finish Eggshell

A high-performance, versatile coating appropriate for a variety of uses including: Exterior Steel: Waterborne, rust-inhibitive coating with excellent adhesion to organic zinc-rich coatings. Used as a primer, intermediate or finish coat on tanks, vessels and other industrial and architectural metal substrates. Humid Environments: Primer/finish for two coat applications over prepared galvanized steel and organic zinc-rich coatings in wet, temperature-controlled exposure areas. Dry Interior Environments: One or two coat, flash-rust and corrosion resistant primer/finish for overheads. Use on prepared carbon and galvanized steel, aluminum, wood and concrete decks, beams, joists and HVAC. Note: Uni Bond DF's "dry-fall" characteristics help reduce the potential for overspray problems on buildings and surrounding property.

Series L140 | Pota-Pox Plus

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Concrete, Ductile Iron, Pipes & Fittings
• Generic Description Polyamidoamine Epoxy

Innovative, low VOC potable water coating which offers high-build edge protection and allows for application at a wide range of temperatures (down to 35°F or 2°C with 44-700 Accelerator). For use on the interior and exterior of steel or concrete tanks, reservoirs, and fittings in potable water service.

Series L140F | Pota-Pox Plus

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Concrete, Ductile Iron, Pipes & Fittings
• Generic Description Polyamidoamine Epoxy

Versatile epoxy coating (factory accelerated version of L140) for protection and finishing of steel. It has excellent resistance to abrasion and is suitable for immersion service. This product can be used for lining storage tanks that contain demineralized, deionized, distilled, or potable water.

Series N140 | Pota-Pox Plus

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Concrete, Other, Ductile Iron, Pipes & Fittings
• Generic Description Polyamidoamine Epoxy

Innovative potable water coating which offers high-build edge protection and allows for application at a wide range of temperatures (down to 35°F or 2°C with 44-700 Accelerator). For use on the interior and exterior of steel or concrete tanks, reservoirs, pipes, valves, pumps, and equipment in potable water service.

Series N140F | Pota-Pox Plus

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Concrete, Other, Ductile Iron, Pipes & Fittings
• Generic Description Polyamidoamine Epoxy

Innovative potable water coating which offers high-build edge protection and allows for application at a wide range of temperatures (down to 35°F or 2°C). For use on the interior and exterior of steel or concrete tanks, reservoirs, pipes, valves, pumps, and equipment in potable water service.

Series V140 | Pota-Pox Plus

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Concrete, Other
• Generic Description Polyamidoamine Epoxy

Innovative potable water coating which offers high-build edge protection and allows for application at a wide range of temperatures (down to 35°F or 2°C with 44-700 Accelerator). For use on the interior and exterior of steel or concrete tanks, reservoirs, pipes, valves, pumps and equipment in potable water service.

Series V140F | Pota-Pox Plus

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Concrete, Other, Ductile Iron, Pipes & Fittings
• Generic Description Polyamidoamine Epoxy

Innovative potable water coating which offers high-build edge protection and allows for application at a wide range of temperatures (down to 35°F or 2°C). For use on the interior and exterior of steel or concrete tanks, reservoirs, pipes, valves, pumps and equipment in potable water service.

Series 206 | Sub-Flex EP

• Uses Intermediate Coats, Primer and/or Block Fillers, Flooring
• For Concrete
• Generic Description Flexible Epoxy

Flexible epoxy underlayment for bridging small substrate cracks in concrete and to provide a protective waterproof membrane under aggregate reinforced flooring systems. This flexible basecoat is capable of withstanding 50 mils of differential movement without damaging the system.

Series 206SC | ChemBloc

• Uses Intermediate Coats, Primer and/or Block Fillers, Linings & Secondary Containment, Flooring
• For Concrete
• Generic Description Modified Flexible Polyamine Epoxy

Glass-reinforced, flexible epoxy mortar basecoat for bridging small substrate cracks in secondary containment concrete structures. Replaces mortar/slurry basecoat for Series 237SC, 239SC, and 252SC when a flexible basecoat is desired.

Series 210 | Even-Flow SL

• Uses Intermediate Coats, Surfacer, Filler, Patcher, Flooring, Top and Finish Coats
• For Concrete
• Generic Description Aggregate-Filled Modified Polyamine Epoxy
• Finish Gloss

A high gloss, high build, self-leveling epoxy topping for concrete floors. It imparts an ultra smooth, aesthetically pleasing finish in a variety of colors, while providing protection against various acids and alkalis, abrasion and frequent cleaning.

Series 215 | Surfacing Epoxy

• Uses Intermediate Coats, Surfacer, Filler, Patcher, Primer and/or Block Fillers
• For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete
• Generic Description Modified Polyamine Epoxy
• Finish Semi-Gloss

An advanced generation, 100% solids epoxy filler and surfacer for concrete or steel. Excellent material for surfacing, patching, and filling voids in pitted steel and bug holes and pits in concrete substrates. Generally topcoated with a variety of high-performance epoxies and polyurethanes for use in mild to aggressive exposures.

Series 215ML | Mat-Reinforced Epoxy Lining

• Uses Intermediate Coats, Surfacer, Filler, Patcher, Primer and/or Block Fillers
• For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete
• Generic Description Modified Polyamine Epoxy

Series 215ML is a trowel applied, fiberglass mat reinforced, 100% solids polyamine epoxy used as part of a lining system for potable and non-potable ultra-filtration membrane process, backwash, and neutralization basins.

Series 222 | Deco-Tread

• Uses Intermediate Coats, Primer and/or Block Fillers, Flooring, Top and Finish Coats
• For Concrete
• Generic Description Modified Polyamine Epoxy

A low ambering, multi-purpose epoxy coating that can be used as a primer, broadcast, slurry/broadcast, mortar, grout coat, metallic color coat, and topcoat. It provides excellent application properties with good flow and self-leveling characteristics. It protects concrete surfaces from impact and abrasion and has excellent chemical resistance with an aesthetically pleasing appearance.

Series 223 | Deco-Trowel

• Uses Intermediate Coats, Flooring, Top and Finish Coats
• For Concrete
• Generic Description Colored Quartz-Filled Modified Polyamine Epoxy
• Finish Decorative quartz—multi-colored appearance. The finished appearance and texture will depend on the type, film thickness and number of clear finish coats selected.

A low ambering, decorative mortar floor-topping system installed at 3/16” to 1/4” thickness. Protects against impact, abrasion and has very good chemical resistance with an aesthetically pleasing appearance.

Series N223 | Deco-Trowel

• Uses Intermediate Coats, Flooring, Top and Finish Coats
• For Concrete
• Generic Description Colored Quartz-Filled Modified Polyamine Epoxy
• Finish Gloss. Decorative quartz—multi-colored appearance. The finished appearance and texture depend on the type, film thickness, and the number of clear finish coats selected.

A low ambering, multi-purpose epoxy coating with enhanced UV stability and resistance to yellowing. Series N223 is a decorative mortar floor-topping system installed at 3/16” to 1/4” thickness. It protects concrete surfaces from impact and abrasion and has excellent chemical resistance with an aesthetically pleasing appearance.

Series 224 | Deco-Fleck

• Uses Intermediate Coats, Flooring, Top and Finish Coats
• For Concrete
• Generic Description Decorative Flake-Filled Modified Polyamine Epoxy
• Finish Decorative flake—multi-colored appearance. The finished appearance will depend on the number, type and film thickness of the clear finished coats selected.

A low ambering, customized decorative floor topping utilizing colored flake, broadcast either at random or refusal. Protects against abrasion and mild chemicals with an aesthetically pleasing speckled appearance.

Series N224 | Deco-Fleck

• Uses Intermediate Coats, Flooring, Top and Finish Coats
• For Concrete
• Generic Description Decorative Flake-Filled Modified Polyamine Epoxy
• Finish Gloss. Decorative quartz—multi-colored appearance. The finished appearance and texture depend on the type, film thickness, and the number of clear finish coats selected.

A low ambering, multi-purpose epoxy coating with enhanced UV stability and resistance to yellowing. Series N224 is a customized decorative floor topping utilizing colored flake, broadcast either at random or refusal. It protects concrete surfaces from impact and abrasion and has excellent chemical resistance with an aesthetically pleasing appearance.

Series 233 | Power-Tread LE

• Uses Intermediate Coats, Primer and/or Block Fillers, Flooring
• For Concrete
• Generic Description Modified Polyamine Epoxy
• Finish Gloss

A lower viscosity, high-solids, multi-purpose epoxy that can be used as a primer, broadcast, slurry/broadcast, mortar, grout coat, metallic color coat and topcoat. Especially useful when penetration is needed to sufficiently anchor epoxy flooring systems over lightly profiled concrete surfaces. Protects concrete surfaces from impact, abrasion and has very good chemical resistance.

Series 237 | Power-Tread

• Uses Intermediate Coats, Primer and/or Block Fillers, Flooring
• Generic Description Modified Polyamine Epoxy
• Finish Gloss

A multi-purpose epoxy coating that can be used as a primer, broadcast, slurry/broadcast, mortar, grout coat, and topcoat. Excellent application properties with good flow and self-leveling characteristics. Protects concrete surfaces from impact, abrasion and has very good chemical resistance.

Series 237SC | ChemBloc

• Uses Intermediate Coats, Primer and/or Block Fillers, Flooring
• For Concrete
• Generic Description Modified Polyamine Epoxy

A multi-purpose resin for fiberglass reinforced mat (65 mils) or mortar/fiberglass reinforced mat (125 mils) secondary containment systems. Protects against chemicals, thermal cycling, impact and abrasion.

Series 238 | Power-Tread FC

• Uses Intermediate Coats, Primer and/or Block Fillers, Flooring
• For Concrete
• Generic Description Modified Polyamine Fast-Cure Epoxy

A multi-purpose epoxy coating that can be used as a primer, broadcast, slurry/broadcast, mortar, grout coat, and topcoat. Excellent application properties with good flow and self-leveling characteristics. Protects concrete surfaces from impact, abrasion and mild chemicals.

Series 239 | ChemTread

• Uses Intermediate Coats, Primer and/or Block Fillers, Flooring, Top and Finish Coats
• For Concrete
• Generic Description Modified Novolac Polyamine Epoxy

A chemical resistant, multi-purpose novolac epoxy coating that can be used as a primer, broadcast, slurry/broadcast, mortar, grout coat, and topcoat. Excellent application properties with good flow and self-leveling characteristics. Protects concrete surfaces from impact, abrasion and mild chemicals.

Series 239SC | ChemBloc

• Uses Intermediate Coats, Primer and/or Block Fillers, Linings & Secondary Containment, Flooring
• Generic Description Modified Novolac Polyamine Epoxy

A highly chemical resistant, multi-purpose resin for fiberglass reinforced mat (65 mils) or mortar/fiberglass reinforced mat (125 mils) secondary containment systems. Protects against harsh chemicals, thermal cycling, impact and abrasion.

Series 242 | Ultra-Tread S

• Uses Intermediate Coats, Primer and/or Block Fillers, Flooring, Top and Finish Coats
• For Concrete
• Generic Description Polyurethane Modified Concrete
• Finish Matte

Ultra-Tread S is a low odor, slurry applied, flowable mortar floor topping designed for monolithic applications in abusive service areas. It provides superior performance to other flooring systems such as acid brick, quarry tile and most polymer flooring systems. Designed for use in food and beverage facilities, pharmaceutical and processing areas, commercial and restaurant kitchens or anywhere a durable floor topping is required. Provides excellent chemical resistance and withstands thermal shock due to hot liquids and aggressive cleaning procedures. Areas may be quickly returned to service within hours of installation, depending on temperature and humidity. Ultra-Tread S is a self-priming base coat that can be applied to 10 day old concrete. It can withstand moisture vapor transmission up to 20 lbs (per ASTM F 1869) and relative humidity up to 99% (per ASTM F 2170).

Series 245 | Ultra-Tread S

• Uses Intermediate Coats, Flooring, Top and Finish Coats
• For Concrete
• Generic Description Polyurethane Modified Concrete
• Finish Matte

Ultra-Tread S is a low odor, slurry applied, flowable mortar floor topping designed for monolithic applications in abusive service areas. It provides superior performance to other flooring systems such as acid brick, quarry tile and most polymer flooring systems. Designed for use in food and beverage facilities, pharmaceutical and processing areas, commercial and restaurant kitchens or anywhere a durable floor topping is required. Provides excellent chemical resistance and withstands thermal shock due to hot liquids and aggressive cleaning procedures. Areas may be quickly returned to service within hours of installation, depending on temperature and humidity. Ultra-Tread S is a self-priming base coat that can be applied to 10 day old concrete. It can withstand moisture vapor transmission up to 20 lbs (per ASTM F 1869) and relative humidity up to 99% (per ASTM F 2170).

Series 256 | ExcellaThane

• Uses Intermediate Coats, Top and Finish Coats
• For Concrete
• Generic Description Modified Aliphatic Polyaspartic
• Finish Gloss. The texture of the finished surface will depend on the film thickness and number of coats applied. *Note:* Application as a clear topcoat may lead to a cloudy appearance if the product is overworked, applied too thick, or applied too far into its pot life. This product has a short working time. Caution should be taken to apply the material immediately after mixing and to not overwork the product when rolling.

An extremely fast-curing, multi-purpose and finish coat resin with low temperature cure capability. Used to build aggregate, colored quartz or decorative flake filled floor topping systems. It can also be used as a clear or pigmented finish coat over systems built using Series 256 or systems built using epoxy, or polyurethane modified concrete floor toppings that have been fully broadcast with aggregate, colored quartz or colored flake. Series 256 will provide protection against impact, abrasion and mild chemicals, has excellent gloss and color retention, and resistance to yellowing. This low VOC, 100% solids urethane exhibits low odor characteristics allowing for use near occupied spaces.

Series 257 | ExcellaThane SS

• Uses Intermediate Coats, Top and Finish Coats
• For Concrete
• Generic Description Modified Aliphatic Polyaspartic
• Finish Gloss. The texture of the finished surface will depend on the film thickness and number of coats applied. *Note:* Application as a clear topcoat may lead to a cloudy appearance if the product is overworked, applied too thick, or applied too far into its pot life. This product has a short working time. Caution should be taken to apply the material immediately after mixing and to not overwork the product when rolling.

A slower setting Polyaspartic floor coating, offering longer working time and lower viscosity. Series 257 minimizes the potential for lap marks and roller lines when used in large flooring applications. It can be used as a two coat thin-film system or as a clear or pigmented finish coat over systems built using epoxy or polyurethane modified concrete floor toppings that have been fully broadcast with aggregate, colored quartz or colored flake. Series 257 will provide protection against impact, abrasion and mild chemicals, has excellent gloss and color retention, and resistance to yellowing. This low VOC, 100% solids urethane exhibits low odor characteristics allowing for use near occupied spaces.

Series 270 | Stranlok

• Uses Intermediate Coats
• For DryWall and Gypsum, Masonry & Stucco, Concrete
• Generic Description Polyamine Epoxy

A high-performance, fiberglass-reinforced wall coating for protection against acids, alkalis and physical abuse. Stranlok’s 100% solids epoxy technology is solventless and VOC compliant, making Stranlok virtually odorless and permitting application in occupied facilities. Its accelerated curing schedule and installation process mean faster return-to-service times. A unique blend of two types of premixed reinforcing fibers allows Stranlok to be spray or trowel applied up to 40 mils. The integrity of the interlocking fibers allows the surface to withstand daily high-pressure steam cleaning. In addition to this high tolerance to “thermal shock,” Stranlok also features broad chemical, impact and abrasion resistance.

Series 273 | Stranlok ML

• Uses Intermediate Coats
• For DryWall and Gypsum, Masonry & Stucco, Concrete, Other
• Generic Description Modified Polyamine Epoxy

A fiberglass mat reinforced coatings system for walls and ceilings providing cleanability and protection against chemical and physical abuse. Provides a high-performance, smooth, seamless surface with excellent chemical, stain, impact and abrasion resistance.

Series 280 | Tneme-Glaze

• Uses Intermediate Coats, Flooring, Top and Finish Coats
• For DryWall and Gypsum, Masonry & Stucco, Concrete, Other
• Generic Description Modified Polyamine Epoxy
• Finish Gloss. (Roller application provides an orange peel finish.)

A glaze-like corrosion resistant coating for walls, ceilings, floors and other surfaces; resistant to frequent pressurized hot water and detergent cleaning. Used as a topcoat/sealer for heavy duty wall and floor systems or in a stand-alone high-performance function. Excellent chemical, stain- and abrasion-resistance for a variety of substrates.

Series 280FC | Tneme-Glaze

• Uses Intermediate Coats, Flooring, Top and Finish Coats
• For DryWall and Gypsum, Masonry & Stucco, Concrete, Other
• Generic Description Modified Polyamine Epoxy
• Finish Gloss. (Roller application provides an orange peel finish.)

A fast-cure glaze-like corrosion resistant coating for walls, ceilings, floors and other surfaces; resistant to frequent pressurized hot water and detergent cleaning. Used as a topcoat/sealer for heavy duty wall and floor systems or in a stand-alone high-performance function. Excellent chemical, stain- and abrasion-resistance for a variety of substrates.

Series 281 | Tneme-Glaze

• Uses Intermediate Coats, Flooring, Top and Finish Coats
• For Concrete
• Generic Description Modified Polyamine Epoxy
• Finish Gloss

A high-gloss, glaze-like coating for concrete floors. It imparts a smooth, aesthetically pleasing finish in a variety of colors, while providing protection against various acids and alkalis, abrasion and frequent cleaning.

Series 282 | Tneme-Glaze

• Uses Intermediate Coats, Flooring, Top and Finish Coats
• For DryWall and Gypsum, Masonry & Stucco, Concrete, Other
• Generic Description Polyamine Novolac Epoxy
• Finish Gloss. (Roller application provides an orange peel finish.)

A highly chemical- and solvent-resistant colored novolac glaze coating for walls, floors and other surfaces. Provides improved aesthetics and additional protection against abrasion, impact, and most acids, alkalis and solvents.

Series N283 | Coving Resin

• Uses Intermediate Coats, Flooring, Top and Finish Coats
• For Concrete
• Generic Description Modified Polyamine Epoxy
• Finish Gloss

A clear, thixotropic binder resin. Series N283 is designed to be used in all phases of cove building or vertical trowel applications (priming, base coat, and topcoat) and it can also be used for concrete repair. Note: When using Series N283 for building cove or troweled wall applications an aggregate similar to 30/50 mesh silica sand, Series 222 or 223 Quartz must be used. Has excellent adhesion, good chemical resistance, repairs concrete, and can be applied up to 1/4” without sagging.

Series 284 | Deco-Clear

• Uses Intermediate Coats, Flooring, Top and Finish Coats
• For Concrete
• Generic Description Modified Polyamine Epoxy
• Finish Gloss. The texture of the finished surface depends on the number of coats applied.

A low ambering, clear finish for decorative flooring systems. It protects against mild chemicals, impact and abrasion, providing a skid-resistant or smooth finish depending on the number of coats.

Series N284 | Deco-Clear

• Uses Intermediate Coats, Flooring, Top and Finish Coats
• For Concrete
• Generic Description Modified Polyamine Epoxy
• Finish Gloss. The texture of the finished surface depends on the number of coats applied.

A low ambering, multi-purpose epoxy coating with enhanced UV stability and resistance to yellowing. Series N284 is a clear finish for decorative flooring systems. It protects concrete surfaces from impact and abrasion and has excellent chemical resistance with an aesthetically pleasing appearance.

Series 287 | Enviro-Pox

• Uses Intermediate Coats, Primer and/or Block Fillers, Flooring, Top and Finish Coats
• For DryWall and Gypsum, Masonry & Stucco, Concrete, Other
• Generic Description Waterborne Epoxy-Amine Adduct
• Finish Semi-gloss

A low odor, rapid cure, wear-resistant coating for floors, walls and other substrates, capable of withstanding moderate commercial and industrial environments. It can withstand mild to moderate chemical and solvent exposures, as well as repeated cleaning. Can also be used as a primer or intermediate coat for thin film epoxy and urethane and acrylic systems.

Series 1026 | Enduratone

• Uses Intermediate Coats, Top and Finish Coats
• For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete
• Generic Description Acrylic Emulsion
• Finish Matte

A durable, easy-to-use, water-based acrylic coating that offers long-wearing protection to a variety of substrates. Excellent as a topcoat or intermediate-coat on anti-corrosive steel coating systems or when applied to concrete and drywall. Easy to apply by brush, roller, and spray, this product’s low odor and low VOC qualities make it versatile choice on architectural and industrial projects. Note: Application methods include “dry-fall” under certain conditions (see application).

Series 1028 | Enduratone

• Uses Intermediate Coats, Top and Finish Coats
• For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
• Generic Description HDP Acrylic Polymer
• Finish Gloss - *Note:* Final gloss level of topcoat can vary depending on number of coats applied. One coat will generally result in a lower sheen than two coats of the material.

Water-based, low VOC, High Dispersion Pure acrylic polymer coating providing excellent long term protection in both interior/exterior exposures. May be applied by spray, brush or roller over a variety of solvent and waterborne steel primers. May also be used over many aged coatings. It is mildew resistant and exhibits very good gloss and color stability. Series 1028 can be used for light duty wall surfaces in water treatment and pharmaceutical environments. Application methods include "dry-fall" under certain conditions (See Application). Note: Series 1028's "dry-fall" characteristics help to reduce the potential for overspray problems on buildings and surrounding property.

Series 1029 | Enduratone

• Uses Intermediate Coats, Top and Finish Coats
• For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
• Generic Description HDP Acrylic Polymer
• Finish Low semi-gloss - *Note:* Final gloss level of topcoat can vary depending on number of coats applied. One coat will generally result in a lower sheen than two coats of the material.

Water-based, low VOC, High Dispersion Pure acrylic polymer coating providing excellent long term protection in both interior/exterior exposures. May be applied by spray, brush or roller over a variety of solvent and waterborne steel primers. May also be used over many aged coatings. It is mildew resistant and exhibits very good gloss and color stability. Series 1028 can be used for light duty wall surfaces in water treatment and pharmaceutical environments. Application methods include "dry-fall" under certain conditions (See Application). Note: Series 1029's "dry-fall" characteristics help reduce the potential for overspray problems on buildings and surrounding property.

Series 1075 | Endura-Shield II

• Uses Intermediate Coats, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Aliphatic Acrylic Polyurethane
• Finish Semi-gloss

A coating highly resistant to abrasion, wet conditions, corrosive fumes and exterior weathering. High build quality combines with project specific primers for two-coat, labor saving systems. Fast curing options are available; see Curing Time below. Product has some applications as a direct to metal finish. Contact your Tnemec representative for more details. NOT FOR IMMERSION SERVICE.

Series 1075U | Endura-Shield II

• Uses Intermediate Coats, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Aliphatic Acrylic Polyurethane
• Finish Semi-gloss

A coating highly resistant to abrasion, wet conditions, corrosive fumes and exterior weathering. High build quality combines with project specific primers for two-coat, labor saving systems. Contains a blend of ultraviolet (UV) light absorbers for enhanced color and gloss retention. Fast curing options are available; see Curing Time below. Product has some applications as a direct to metal finish. Contact your Tnemec representative for more details. NOT FOR IMMERSION SERVICE.

Series 1081 | Endura-Shield

• Uses Intermediate Coats, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Waterborne Acrylic Polyurethane
• Finish Semi-Gloss - *Note:* Final gloss level of topcoat can vary depending on number of coats applied. One coat will generally result in a lower sheen than two coats of the material.

A waterborne polyurethane coating that provides excellent abrasion resistance and color and gloss retention for applications to steel, concrete and other miscellaneous substrates. It features low VOC content, low odor, semi-gloss finish and easy cleanup.

Series 1095 | Endura-Shield

• Uses Intermediate Coats, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Aliphatic Acrylic Polyurethane
• Finish Semi-gloss

A user friendly, low VOC, aliphatic polyurethane coating that provides excellent color and gloss retention for exterior applications to steel, concrete and other substrates in commercial, industrial, and marine environments. Direct-to-Metal capability allows for a labor-saving, high-build, single coat application.