Series 2H | Hi-Build Tneme-Gloss

• Uses Top and Finish Coats
• For DryWall and Gypsum, Steel
• Generic Description Alkyd
• Finish Gloss

High gloss industrial enamel offering good flow, hiding and protection for recommended surfaces in mild to moderately severe exposures. Not for use on surfaces that are continually wet or sweat frequently.

Series 2HS | Low VOC Tneme-Gloss

• Uses Top and Finish Coats
• For Steel, Other
• Generic Description Alkyd
• Finish Gloss

A low VOC, high solids, high gloss industrial enamel offering good flow, hiding and protection for recommended surfaces in mild to moderately severe exposures. Not for use on surfaces that are continually wet or sweat frequently.

Series V10 | Tnemec Primers

• Uses Primer and/or Block Fillers
• For Steel, Other
• Generic Description Modified Alkyd

Chemically active, rust-inhibitive primer for ferrous metals. This low VOC primer provides extended weathering for shop and field priming of structural and miscellaneous steel. Series 10-99W can also be used as a primer for wood substrates.

Series 27 | F.C. Typoxy

• Uses Intermediate Coats, Primer and/or Block Fillers, Original Equipment Manufacturer (OEM)
• For Steel, Other
• Generic Description Polyamide Epoxy
• Finish Flat

Versatile low-temperature coating ideally suited for steel fabrication and OEM applications. Also widely used as a field tie-coat. Provides fast curing and rapid handling capabilities.

Series 27WB | Typoxy

• Uses Intermediate Coats, Primer and/or Block Fillers, Original Equipment Manufacturer (OEM)
• For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
• Generic Description Inorganic Hybrid Water-Based Epoxy
• Finish Satin

A unique, low odor, low VOC, water-based epoxy coating featuring HydroLink curing technology for exceptional durability and corrosion resistance. Used for the protection and finishing of steel and concrete structures including structural steel, tanks, pipes, and equipment. Superior wetting for marginally prepared steel and tightly adhered existing coatings. This coating is ideally suited for steel fabrication and OEM applications, with fast-curing and rapid handling properties. Series 27WB exhibits low yellowing and good color stability in whites and light tone colors. Formula protected under U.S. patent.

Series 37H | Chem-Prime H.S.

• Uses Primer and/or Block Fillers
• For Steel, Other, Ductile Iron, Pipes & Fittings
• Generic Description Phenolic Alkyd

Lead- and chromate-free, fast-drying, corrosion-resistant primer that accepts a variety of high-performance topcoats. Ideally suited for steel fabricators, OEM’s and field applications. Note: Not recommended for immersion.

Series 43-236 | Fast Dry Aluminum

• Uses Top and Finish Coats
• For Steel
• Generic Description Copolymer Aluminum
• Finish Semi-Gloss

Fast drying spray-applied coating offering good protection for most exterior weathering conditions. Note: Series 43-236's "dry-fall" characteristics help reduce the potential for overspray problems on buildings and surrounding property.

Series 43-36 | Chrome Aluminum

• Uses Top and Finish Coats
• For Steel, Other
• Generic Description Alkyd Aluminum
• Finish Low sheen

Metallic aluminum finish for protection against weather, heat and mild industrial fumes. Used on primed or previously-painted carbon and galvanized steel: tank exteriors, piping, equipment and structures. Not for immersion service.

Series 46H-413 | Hi-Build Tneme-Tar

• Uses Linings & Secondary Containment
• For Steel, Concrete, Other, Ductile Iron, Pipes & Fittings
• Generic Description Polyamide Epoxy-Coal Tar
• Finish Semi-gloss

High-build corrosion resistant coating providing one coat protection for concrete and steel in a variety of chemical, immersion and underground conditions. Also, when a two-coat application is desired, a low film build option is possible.

Series 48 | Multi-Purpose Epoxy

• Uses Intermediate Coats, Primer and/or Block Fillers, Original Equipment Manufacturer (OEM)
• For Steel, Masonry & Stucco, Concrete
• Generic Description Polyamide Epoxy
• Finish Flat

A multi-purpose epoxy coating with fast-cure and low temperature application properties. An excellent choice for shop and field application when rapid curing for fast turn-around is needed. Can be applied to a variety of substrates including steel, concrete, and CMU, as well as previously painted surfaces. Accepts a range of primers and topcoats for complete system selection.

Series 49 | Multi-Purpose Epoxy

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete
• Generic Description Modified Polyamine Epoxy
• Finish Semi-gloss. Gloss can vary with texture, porosity of substrate and thickness of film.

A high-solids, low VOC epoxy coating used for a multitude of primer and topcoat applications. The tough, abrasion-resistant film of Series 49 provides durable protection to concrete, CMU, and steel, and it is immersion grade, making it an excellent choice for non-potable service environments. Excellent adhesion properties allow for use on marginally prepared surfaces when blast cleaning is not possible.

Series 61 | Tneme-Liner

• Uses Linings & Secondary Containment
• For Steel, Masonry & Stucco, Concrete
• Generic Description Cycloaliphatic Amine Epoxy
• Finish Semi-gloss

Tightly cross-linked epoxy with excellent corrosion and chemical resistance. Principally used for immersion service, including fuel and crude oil storage, fuel pipelines, chemical containment and wastewater treatment.

Series 66 | Hi-Build Epoxoline

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
• Generic Description Polyamide Epoxy
• Finish Satin

Industry standard for epoxy coatings for over 40 years. Known for its forgiving application characteristics in adverse and varied conditions, and for benchmark performance.

Series 66HS | Hi-Build Epoxoline

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Polyamide Epoxy
• Finish Satin

• Product is made to order for specific projects. Contact your Tnemec Representative for additional information.

A high-solids, low VOC, pure polyamide epoxy that offers exceptional protection to a variety of substrates in atmospheric and immersion environments. Applied as a primer, intermediate, or topcoat, this versatile coating also accepts a wide-range of finish coats, allowing for a coating system tailored to specific exposure conditions.

Series L69 | Hi-Build Epoxoline II

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Polyamidoamine Epoxy
• Finish Satin

A versatile, low VOC epoxy for protection and finishing of steel and concrete. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals. This product can also be used for lining storage tanks that contain demineralized, deionized, or distilled water. Can serve as a block filler on cementitious or masonry substrates.

Series L69F | Hi-Build Epoxoline II

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Polyamidoamine Epoxy
• Finish Satin

A versatile, low VOC, factory-accelerated epoxy for protection and finishing of steel and concrete. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals.

Series N69 | Hi-Build Epoxoline II

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Polyamidoamine Epoxy
• Finish Satin

An advanced generation epoxy for protection and finishing of steel and concrete in commercial, industrial and marine environments. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals. This product can also be used for lining storage tanks that contain demineralized, deionized or distilled water.

Series N69F | Hi-Build Epoxoline II

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Polyamidoamine Epoxy
• Finish Satin

An advanced generation epoxy for the protection and finishing of steel and concrete. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals. This product can also be used as a block filler on cementitious or masonry substrates.

Series V69 | Hi-Build Epoxoline II

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Polyamidoamine Epoxy
• Finish Satin

An advanced generation epoxy for protection and finishing of steel and concrete. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals. This product can also be used for lining storage tanks that contain demineralized, deionized or distilled water.

Series V69F | Hi-Build Epoxoline II

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Polyamidoamine Epoxy
• Finish Satin

An advanced generation epoxy for the protection and finishing of steel and concrete. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals. This product can also be used as a block filler on cementitious or masonry substrates.

Series 72 | Endura-Shield

• Uses Top and Finish Coats
• For Steel
• Generic Description Aliphatic Acrylic Polyurethane
• Finish Gloss

A durable topcoat for commercial, industrial, and marine applications that is highly resistant to abrasion, wet conditions, corrosive fumes, chemical contact and has excellent resistance to exterior weathering. Direct-to-Metal capability allows for a labor-saving, high-build, single coat application.

Series 73 | Endura-Shield

• Uses Intermediate Coats, Original Equipment Manufacturer (OEM), Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Aliphatic Acrylic Polyurethane
• Finish Semi-gloss

A coating for commercial, industrial, and marine applications that is highly resistant to abrasion, wet conditions, corrosive fumes, chemical contact and has excellent resistance to exterior weathering. Direct-to-Metal capability allows for a labor-saving, high-build, single coat application.

Series 88HS | Azeron H.S. Primer

• Uses Primer and/or Block Fillers
• For Steel
• Generic Description Alkyd Primer
• Finish Flat

Fast-dry, lead- and chromate-free, rust-inhibitive shop primer for structural and miscellaneous steel that is to be enclosed, protected or topcoated.

Series 90E-92 | Tneme-Zinc

• Uses High Temp, Primer and/or Block Fillers
• For Steel, Ductile Iron, Pipes & Fittings
• Generic Description Ethyl Silicate Inorganic Zinc-Rich

Self-curing, primer/finish with tenacious bonding and abrasion resistance qualities. Its galvanic action resists undercutting. Excellent stand alone performance in high temperature or long-term atmospheric exposure. Finish with specialized topcoats to improve aesthetics, increase long-term performance or protect the primer from attack in aggressive exposures.

Series 90G-1K97 | Tneme-Zinc

• Uses Primer and/or Block Fillers
• For Steel
• Generic Description Aromatic Polyurethane, Zinc-Rich

An advanced technology, single-component, moisture-cured, zinc-rich primer providing extraordinary performance, user-friendly and easy application. Also used for field touch-up of inorganic zinc coating.

Series 90-75 | Tneme-Zinc

• Uses Primer and/or Block Fillers
• For Steel
• Generic Description Open Matrix, Zinc Rich Epoxy

Series 90-75 is a waterborne, zinc-rich epoxy that offers extended protection to steel surfaces in industrial and marine environments. This innovative coating forms a micro-porous polymer structure in the dry film improving the conductivity between the zinc particles which provides superior galvanic corrosion protection. Its ultra-low VOC formulation cures quickly and provides outstanding long-term corrosion resistance when used with other Tnemec high-performance coatings. U.S. patent pending.

Series 90-97 | Tneme-Zinc

• Uses Primer and/or Block Fillers
• For Steel
• Generic Description Aromatic Urethane, Zinc-Rich

An advanced technology, two-component, moisture-cured, zinc-rich primer providing extraordinary performance. It’s user friendly and rapid curing so chemical- and corrosion-resistant topcoats can be applied the “same-day.” Also used for field touch-up of inorganic zinc coating. Application methods include “dry-fall” under certain conditions (see Application).

Series H90-97 | Tneme-Zinc

• Uses Primer and/or Block Fillers
• For Steel
• Generic Description Aromatic Urethane, Zinc-Rich

An advanced technology, two-component, moisture-cured, zinc-rich primer providing extraordinary performance. It's user friendly and rapid curing so chemical- and corrosion-resistant topcoats can be applied the "same-day." Also used for field touch-up of inorganic zinc coating. H90-97 is HAPS compliant for use in-shop.

Series 90-98 | Tneme-Zinc

• Uses High Temp, Primer and/or Block Fillers
• For Steel, Ductile Iron, Pipes & Fittings
• Generic Description Ethyl Silicate Inorganic Zinc-Rich

Self-curing, corrosion-resistant steel or ductile iron primer with tenacious bonding and abrasion resistance qualities. Its galvanic action resists undercutting. Excellent stand alone performance in high temperature or long-term atmospheric exposure. Finish with specialized topcoats to improve aesthetics, increase long-term performance or protect the primer from attack in aggressive exposures.

Series 94-H2O | Hydro-Zinc

• Uses Primer and/or Block Fillers
• For Steel
• Generic Description Aromatic Urethane, Zinc-Rich

A single-component, moisture-cured, zinc-rich primer for steel structures, including the interior and exterior of steel potable water tanks. Commonly used in commercial, industrial, and marine markets in various applications to provide outstanding long-term corrosion resistance when used as a primer in conjunction with other Tnemec coatings. Series 94-H2O has no maximum recoat time, cures quickly and offers rapid recoat at surface temperatures down to 35°F (2°C). Note: When used in conjunction with cathodic protection, anodes or impressed current systems should not provide current demand more negative than –1.05 volts relative to a copper–copper sulfate reference electrode half-cell.

Series 104 | H.S. Epoxy

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete
• Generic Description Cycloaliphatic Amine Epoxy
• Finish Semi-gloss. Gloss can vary with texture, porosity of substrate and thickness of film.

Versatile coating applies up to 10 mils per coat on steel or concrete. Protects in immersion, salt spray and chemical exposures. Superior abrasion- and stain-resistance.

Series 113 | H.B. Tneme-Tufcoat

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
• Generic Description Waterborne Acrylic Epoxy
• Finish Satin

High performance coating suitable for concrete, steel and other commonly used building materials. Features include high-build, low odor, non-yellowing white and fade resistant colors; easy cleanup and stain-, abrasion-, chemical- and moisture-resistance. Good exterior performance.

Series 114 | H.B. Tneme-Tufcoat

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
• Generic Description Waterborne Acrylic Epoxy
• Finish Gloss

High performance gloss coating suitable for concrete, steel and other commonly used building materials. Features include high-build, low odor, non-yellowing white and fade resistant colors; easy cleanup and stain-, abrasion-, chemical- and moisture-resistance. Good exterior performance.

Series 115 | Uni-Bond DF

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Concrete, Other
• Generic Description Self-crosslinking Hydrophobic Acrylic
• Finish Eggshell

A high-performance, versatile coating appropriate for a variety of uses including: Exterior Steel: Waterborne, rust-inhibitive coating with excellent adhesion to zinc-rich coatings. Used as a primer, intermediate and finish coat on tanks, vessels and other industrial and architectural metal substrates. Humid Environments: Primer/finish for two coat applications over prepared galvanized steel and zinc-rich coatings in wet, temperature-controlled exposure areas. Dry Interior Environments: One or two coat, flash-rust and corrosion resistant primer/finish for overheads. Use on prepared carbon and galvanized steel, aluminum, wood and concrete decks, beams, joists and HVAC. Note: Uni-Bond DF's "dry-fall" characteristics help reduce the potential for overspray problems on buildings and surrounding property.

Series V115 | Uni-Bond DF

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Concrete, Other
• Generic Description Self-crosslinking Hydrophobic Acrylic
• Finish Eggshell

A high-performance, versatile coating appropriate for a variety of uses including: Exterior Steel: Waterborne, rust-inhibitive coating with excellent adhesion to organic zinc-rich coatings. Used as a primer, intermediate or finish coat on tanks, vessels and other industrial and architectural metal substrates. Humid Environments: Primer/finish for two coat applications over prepared galvanized steel and organic zinc-rich coatings in wet, temperature-controlled exposure areas. Dry Interior Environments: One or two coat, flash-rust and corrosion resistant primer/finish for overheads. Use on prepared carbon and galvanized steel, aluminum, wood and concrete decks, beams, joists and HVAC. Note: Uni Bond DF's "dry-fall" characteristics help reduce the potential for overspray problems on buildings and surrounding property.

Series 118 | Uni-Bond Mastic

• Uses Primer and/or Block Fillers
• For Steel, Other
• Generic Description Mastic Waterborne Acrylic
• Finish Matte

A high-build, rust-inhibitive, elastomeric coating formulated for exceptional adhesion and corrosion resistance over minimally prepared aged coating systems. Series 118 is an excellent choice for projects where abrasive blast cleaning of the substrate is not possible and an anti-corrosive coating is needed. Uni-Bond Mastic accepts a variety of high-performance topcoats for the creation of a long-term protective and aesthetic coating system. Coating film can be reinforced and strengthened with a variety of mesh options when dictated by exposure conditions and service environments.

Series 130 | Envirofill

• Uses Primer and/or Block Fillers
• For Masonry & Stucco, Concrete
• Generic Description Waterborne Cementitious Acrylic

Exceptional filling capabilities for interior/exterior porous concrete and CMU. Seals and primes surface for application of a variety of high performance water- and solvent-based topcoats in moderately severe exposures.

Series 132 | ProTuff Mastic

• Uses Primer and/or Block Fillers
• For Steel
• Generic Description Phenalkamine Epoxy Mastic
• Finish Semi-gloss

Series 132 is a versatile, high-build, surface tolerant epoxy designed for application over tightly adhered light corrosion and marginally prepared or previously coated steel, or as a primer/intermediate coat under weather-able finishes. Series 132 may be applied at low-temperatures, over dew point conditions and on damp surfaces. Suitable for use on structures subjected to corrosive, damp, or immersion environments including coastal and marine structures such as tanks, boat hulls, voids, machinery spaces, bilges, and other wet areas. Good for maintenance and new construction applications.

Series 133 | ProTuff Aluminum

• Uses Primer and/or Block Fillers
• For Steel
• Generic Description Phenalkamide Aluminum Epoxy Mastic
• Finish Semi-gloss

A high-build, aluminum-filled surface tolerant epoxy mastic designed for application over tightly adhered corrosion, marginally prepared steel, and old coatings. Series 133 may be applied at low-temperatures and over dew point conditions and on damp surfaces. The preferred selection for holding back active corrosion and as a basecoat under weather-able and epoxy finishes.

Series 135 | Chembuild

• Uses Primer and/or Block Fillers
• For Steel, Other
• Generic Description Modified Polyamidoamine Epoxy
• Finish Semi-gloss

High-build coating with superior wetting for marginally prepared rusty steel and tightly adhering old coatings. Excellent abrasion-, chemical- and corrosion-resistance. Perfect foundation for aliphatic-polyurethanes. NOT FOR IMMERSION SERVICE.

Series 141 | Epoxoline

• Uses Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Concrete
• Generic Description Modified Polyamine Epoxy

A high-solids lining offering high-build edge protection and long-term durability. Series 141 is abrasion and corrosion-resistant for extended immersion service in crude oil and finished fuels. Used to protect steel and concrete storage tanks, transport tanks, pipelines, and industrial wastewater while increasing service life.

Series 142 | Epoxoline

• Uses Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Concrete
• Generic Description Glass Flake Reinforced Modified Polyamine Epoxy

Abrasion resistant, high solids, epoxy coating which offers high-build edge protection and excellent corrosion resistance. Contains glass flake and aluminum oxide for improved film integrity. For use on the interior and exterior of steel or concrete tanks, pipes, and other heavy-duty equipment in industrial service.

Series 151-1051 | Elasto-Grip FC

• Uses Primer and/or Block Fillers
• For DryWall and Gypsum, Masonry & Stucco, Other
• Generic Description Waterborne Modified Polyamine Epoxy
• Finish Matte

Penetrating, flexible and low-odor primer for sealing cementitious and other porous substrates. Also excellent as a tie-coat for specialized finishes over sound existing coatings.

Series 156 | Enviro-Crete

• Uses Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Modified Waterborne Acrylate
• Finish Matte — Smooth

Flexible, breathable coating primarily for concrete and masonry that can fill and bridge minor hairline cracks. Excellent elastomeric protection against driving rain, alternate freezing-thawing and UV light. Series 156 can also be used as a low cohesive stress overcoat for aged oil or alkyd systems.

Series 157 | Enviro-Crete

• Uses Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Modified Waterborne Acrylate
• Finish Matte — Sand Texture

Flexible, breathable coating primarily for concrete and masonry that can fill and bridge minor hairline cracks. Excellent elastomeric protection against driving rain, alternate freezing-thawing and UV light.

Series 158 | Bio-Lastic

• Uses Top and Finish Coats
• For Steel, Masonry & Stucco, Other
• Generic Description Specialized Waterborne Acrylate
• Finish Matte

A durable coating specially formulated to resist mildew growth on the paint film. Permeable and flexible, it’s capable of bridging cracks and can withstand minor substrate movement, frequent scrubbing and cleaning.

Series 161 | Tneme-Fascure

• Uses Primer and/or Block Fillers, Top and Finish Coats
• For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
• Generic Description Polyamide Epoxy
• Finish Satin

Low temperature-cure, corrosion-resistant coating for protection against abrasion, immersion and mild chemical contact. Fast recoat at 75°F (24°C).

Series 180 | W.B. Tneme-Crete

• Uses Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete
• Generic Description Acrylic Emulsion
• Finish Flat, smooth

Decorative, high-build protection against weather, driving rain, industrial fumes and alternate freezing-thawing. Formulated to resist mildew growth on the paint film. Available in smooth (Series 180) and sand-texture (Series 181) finishes for concrete, CMU and properly primed steel. Spray application "dry-falls" under certain conditions.

Series 181 | W.B. Tneme-Crete

• Uses Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete
• Generic Description Acrylic Emulsion
• Finish Flat, sand texture

Decorative, high-build protection against weather, driving rain, industrial fumes and alternate freezing-thawing. Formulated to resist mildew growth on the paint film. Available in smooth (Series 180) and sand-texture (Series 181) finishes for concrete, CMU and properly primed steel. Spray application “dry-falls” under certain conditions.

Series 201 | Epoxoprime

• Uses Primer and/or Block Fillers, Flooring, Top and Finish Coats
• For DryWall and Gypsum, Masonry & Stucco, Concrete, Other
• Generic Description Modified Polyamine Epoxy

High-solids moisture tolerant epoxy used for priming concrete, wood and drywall. Also as a stand-alone one-coat clear floor sealer. Excellent chemical resistance for a variety of substrates.

Series 205 | Terra-Tread FC

• Uses Primer and/or Block Fillers, Flooring, Top and Finish Coats
• For Concrete
• Generic Description Polyamide Epoxy
• Finish Pigmented: Satin Clear: Gloss

A fast-cure, versatile coating that can be used as a penetrating primer or a general duty topcoat for protection against abrasion and mild chemicals. Can be applied in temperatures as low as 35°F (2°C).

Series 206 | Sub-Flex EP

• Uses Intermediate Coats, Primer and/or Block Fillers, Flooring
• For Concrete
• Generic Description Flexible Epoxy

Flexible epoxy underlayment for bridging small substrate cracks in concrete and to provide a protective waterproof membrane under aggregate reinforced flooring systems. This flexible basecoat is capable of withstanding 50 mils of differential movement without damaging the system.

Series 206SC | ChemBloc

• Uses Intermediate Coats, Primer and/or Block Fillers, Linings & Secondary Containment, Flooring
• For Concrete
• Generic Description Modified Flexible Polyamine Epoxy

Glass-reinforced, flexible epoxy mortar basecoat for bridging small substrate cracks in secondary containment concrete structures. Replaces mortar/slurry basecoat for Series 237SC, 239SC, and 252SC when a flexible basecoat is desired.

Series 208 | Epoxoprime MVT

• Uses Primer and/or Block Fillers, Flooring
• For Concrete
• Generic Description Modified Polyamine Epoxy

Epoxoprime MVT is a unique, moisture-tolerant, two component, low viscosity, high solids epoxy primer designed to reduce moisture vapor emissions and provide alkalinity control for concrete with elevated moisture vapor transmission levels that exceed the acceptable limits of non-breathing resilient and polymer floor topping finishes. Epoxoprime MVT can be applied to properly prepared, 10 day old concrete and withstands moisture vapor transmission up to 15 lbs (per ASTM F 1869) and relative humidity up to 95% (per ASTM F 2170). Epoxoprime MVT has a low perm rating (0.05 perm) and is alkaline insensitive to pH levels of 14.

Series 210 | Even-Flow SL

• Uses Intermediate Coats, Surfacer, Filler, Patcher, Flooring, Top and Finish Coats
• For Concrete
• Generic Description Aggregate-Filled Modified Polyamine Epoxy
• Finish Gloss

A high gloss, high build, self-leveling epoxy topping for concrete floors. It imparts an ultra smooth, aesthetically pleasing finish in a variety of colors, while providing protection against various acids and alkalis, abrasion and frequent cleaning.

Series 215 | Surfacing Epoxy

• Uses Intermediate Coats, Surfacer, Filler, Patcher, Primer and/or Block Fillers
• For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete
• Generic Description Modified Polyamine Epoxy
• Finish Semi-Gloss

An advanced generation, 100% solids epoxy filler and surfacer for concrete or steel. Excellent material for surfacing, patching, and filling voids in pitted steel and bug holes and pits in concrete substrates. Generally topcoated with a variety of high-performance epoxies and polyurethanes for use in mild to aggressive exposures.

Series 215ML | Mat-Reinforced Epoxy Lining

• Uses Intermediate Coats, Surfacer, Filler, Patcher, Primer and/or Block Fillers
• For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete
• Generic Description Modified Polyamine Epoxy

Series 215ML is a trowel applied, fiberglass mat reinforced, 100% solids polyamine epoxy used as part of a lining system for potable and non-potable ultra-filtration membrane process, backwash, and neutralization basins.

Series 217 | MortarCrete

• Uses Surfacer, Filler, Patcher
• For Concrete
• Generic Description Calcium Sulfoaluminate Cementitious Repair Mortar and Concrete

A single-component, ultra rapid setting, hydraulic cementitious resurfacer used to restore deteriorated concrete surfaces or extended with aggregate to make high-strength concrete.

Series 218 | MortarClad

• Uses Surfacer, Filler, Patcher
• For Masonry & Stucco, Concrete
• Generic Description Epoxy Modified Cementitious Mortar

A high-performance, aggregate reinforced material for surfacing, patching and filling voids and bugholes in concrete substrates. Generally topcoated with a variety of high-performance epoxies and polyurethanes for use in mild to aggressive exposures.

Series 218-1000 | MortarClad

• Uses Surfacer, Filler, Patcher
• For Concrete
• Generic Description Epoxy Modified Cementitious Mortar

A high-performance, aggregate reinforced material for surfacing, patching and filling voids and bugholes in concrete substrates. Generally topcoated with a variety of high-performance epoxies and polyurethanes for use in mild to aggressive exposures.

Series 239 | ChemTread

• Uses Intermediate Coats, Primer and/or Block Fillers, Flooring, Top and Finish Coats
• For Concrete
• Generic Description Modified Novolac Polyamine Epoxy

A chemical resistant, multi-purpose novolac epoxy coating that can be used as a primer, broadcast, slurry/broadcast, mortar, grout coat, and topcoat. Excellent application properties with good flow and self-leveling characteristics. Protects concrete surfaces from impact, abrasion and mild chemicals.

Series 241 | Ultra-Tread MVT

• Uses Primer and/or Block Fillers, Flooring
• For Concrete
• Generic Description Polyurethane Modified Concrete

Ultra-Tread MVT is a low odor, slurry applied, high performance moisture control base layer designed to reduce moisture vapor emissions prior to the application of non-breathing, polymer floor topping finishes. Ultra-Tread MVT is a self-priming, base coat that can be applied to 10 day old concrete. It can withstand moisture vapor transmission up to 20 lbs (per ASTM F 1869) and relative humidity up to 99% (per ASTM F 2170). Note: Series 241 must be broadcast to refusal with aggregate, color quartz or decorative flake typically completed within 10 to 15 minutes of application. Color quartz and/or decorative flake systems will require an additional broadcast layer using Series 222, 224, 237, 238, 256, 257 or 286, clear to obtain a uniform appearance and texture before applying the desired clear finish coats. This will typically result in a total system thickness of approximately 1/8".

Series 242 | Ultra-Tread S

• Uses Intermediate Coats, Primer and/or Block Fillers, Flooring, Top and Finish Coats
• For Concrete
• Generic Description Polyurethane Modified Concrete
• Finish Matte

Ultra-Tread S is a low odor, slurry applied, flowable mortar floor topping designed for monolithic applications in abusive service areas. It provides superior performance to other flooring systems such as acid brick, quarry tile and most polymer flooring systems. Designed for use in food and beverage facilities, pharmaceutical and processing areas, commercial and restaurant kitchens or anywhere a durable floor topping is required. Provides excellent chemical resistance and withstands thermal shock due to hot liquids and aggressive cleaning procedures. Areas may be quickly returned to service within hours of installation, depending on temperature and humidity. Ultra-Tread S is a self-priming base coat that can be applied to 10 day old concrete. It can withstand moisture vapor transmission up to 20 lbs (per ASTM F 1869) and relative humidity up to 99% (per ASTM F 2170).

Series 243 | Ultra-Tread V

• Uses Flooring
• For Concrete
• Generic Description Polyurethane Modified Concrete
• Finish Matte

Ultra-Tread V is a low-odor mortar designed for troweling vertical surfaces such as trenches and equipment pads, and for building cove base. It should be used for vertical application needs in conjunction with horizontal applications of Series 242 Ultra-Tread S, Series 244 Ultra-Tread M or Series 245 Ultra-Tread S. Designed for use in food and beverage facilities, pharmaceutical and processing areas, commercial and restaurant kitchens or anywhere a durable floor topping is required. Provides excellent chemical resistance and withstands thermal shock due to hot liquids and aggressive cleaning procedures. Areas may be quickly returned to service within hours of installation, depending on temperature and humidity.

Series 244 | Ultra-Tread M

• Uses Flooring, Top and Finish Coats
• For Concrete
• Generic Description Polyurethane Modified Concrete
• Finish Matte

Ultra-Tread M is a low odor, mortar applied floor topping designed for monolithic applications in abusive service areas. It provides superior performance to other flooring systems such as acid brick, quarry tile and most polymer flooring systems. Designed for use in food and beverage facilities, pharmaceutical and processing areas, commercial and restaurant kitchens or anywhere a durable floor topping is required. Provides excellent chemical resistance and withstands thermal shock due to hot liquids and aggressive cleaning procedures. Areas may be quickly returned to service within hours of installation, depending on temperature and humidity. Ultra-Tread M is a self-priming mortar that can be applied to 10 day old concrete. It can withstand moisture vapor transmission up to 20 lbs (per ASTM F 1869) and relative humidity up to 99% (per ASTM F 2170).

Series 245 | Ultra-Tread S

• Uses Intermediate Coats, Flooring, Top and Finish Coats
• For Concrete
• Generic Description Polyurethane Modified Concrete
• Finish Matte

Ultra-Tread S is a low odor, slurry applied, flowable mortar floor topping designed for monolithic applications in abusive service areas. It provides superior performance to other flooring systems such as acid brick, quarry tile and most polymer flooring systems. Designed for use in food and beverage facilities, pharmaceutical and processing areas, commercial and restaurant kitchens or anywhere a durable floor topping is required. Provides excellent chemical resistance and withstands thermal shock due to hot liquids and aggressive cleaning procedures. Areas may be quickly returned to service within hours of installation, depending on temperature and humidity. Ultra-Tread S is a self-priming base coat that can be applied to 10 day old concrete. It can withstand moisture vapor transmission up to 20 lbs (per ASTM F 1869) and relative humidity up to 99% (per ASTM F 2170).

Series 246 | Ultra-Tread Glaze

• Uses Flooring, Top and Finish Coats
• For Concrete
• Generic Description Modified Polyurethane
• Finish Matte

Ultra-Tread Glaze is a pigmented, high-build, low odor, polyurethane coating. Typically used as a topcoat for sealing or locking aggregate in Series 242 Ultra-Tread S or Series 245 Ultra-Tread S broadcast texture finishes. Designed for use in food and beverage facilities, pharmaceutical and processing areas, commercial and restaurant kitchens or anywhere a durable floor topping is required. Provides excellent chemical resistance and withstands thermal shock due to hot liquids and aggressive cleaning procedures. Areas may be quickly returned to service within hours of installation, depending on temperature and humidity.

Series 247 | EverThane

• Uses Flooring, Top and Finish Coats
• For Concrete
• Generic Description Aliphatic Moisture Cured Urethane
• Finish Gloss

Extremely hard, chemical-resistant urethane floor coating with superb flow characteristics. Excellent resistance to abrasion, wet conditions, corrosive fumes and chemical contact. Excellent gloss and color retention. Low odor characteristic allows for use near occupied space. Note: For horizontal surfaces only.

Series 248 | EverThane

• Uses Flooring, Top and Finish Coats
• For Concrete
• Generic Description Aliphatic Moisture Cured Urethane
• Finish Semi-gloss. *Note:* The gloss level can be reduced by adding two Part C filler components to each kit.

Extremely hard, chemical-resistant urethane floor coating with superb wear characteristics. Excellent resistance to abrasion, wet conditions, corrosive fumes and chemical contact. Excellent gloss and color retention. Low odor characteristic allows for use near occupied space.

Series 251SC | ChemBloc

• Uses Primer and/or Block Fillers, Linings & Secondary Containment
• For Steel, Concrete
• Generic Description Novolac Vinyl Ester

A chemical resistant primer for use with Series 252SC secondary containment system. Note: Contact your Tnemec representative or Tnemec Technical Services with specific chemical exposures.

Series 252SC | ChemBloc

• Uses Linings & Secondary Containment, Top and Finish Coats
• For Steel, Concrete
• Generic Description Novolac Vinyl Ester

A highly chemical resistant, multi-purpose resin for fiberglass reinforced mat (65 mils) or mortar/fiberglass reinforced mat (125 mils) secondary containment systems. Protects against harsh chemicals, thermal cycling, impact and abrasion.

Series 282 | Tneme-Glaze

• Uses Intermediate Coats, Flooring, Top and Finish Coats
• For DryWall and Gypsum, Masonry & Stucco, Concrete, Other
• Generic Description Polyamine Novolac Epoxy
• Finish Gloss. (Roller application provides an orange peel finish.)

A highly chemical- and solvent-resistant colored novolac glaze coating for walls, floors and other surfaces. Provides improved aesthetics and additional protection against abrasion, impact, and most acids, alkalis and solvents.

Series 394 | PerimePrime

• Uses Primer and/or Block Fillers
• For Steel
• Generic Description Aromatic Polyurethane, Mio-Zinc Filled Primer

Specially formulated, one-component, moisture-cured, micaceous iron oxide and zinc-filled primer that offers superior bonding to marginally prepared rusty steel and tightly adhered old coatings. This high-performance primer is ideal for corrosion resistance with a triple barrier mechanism of zinc, mio, and urethane resin built into the dry film. It is suitable as a corrosion-resistant primer under certain fireproofing systems. Contact your Tnemec representative for specific information.

Series 469 | LavaCrete

• Uses Surfacer, Filler, Patcher
• For Concrete
• Generic Description Epoxy Polymer Concrete
• Finish Flat (as poured). *Note:* A semi-gloss finish can be achieved by troweling the surface.

Series 469 LavaCrete is a non-shrinking epoxy polymer concrete used for the rehabilitation of severely eroded concrete or for the corrosion proofing of new concrete where chemical resistance is required throughout the complete topping system. Extremely fast setting, allowing for rebuilds of process floors and secondary containment structures. Also used to cast sumps, drains and trenches and is an outstanding grouting material for vibration dampening in base plates and on motor pads. Series 469 kits are packaged for casting and standard placement of material. A grouting mix may be made by adjusting the kit for a more fluid application. Series 469 resin may also be used in broadcast, trowel and mat reinforced systems with a multitude of ancillary materials for services in chemical processing, wastewater, paper, power and other demanding industries.

Series 489 | LavaCrete

• Uses Surfacer, Filler, Patcher
• For Concrete
• Generic Description Epoxy Vinyl Ester Polymer Concrete
• Finish Flat (as poured). *Note:* A semi-gloss finish can be achieved by troweling the surface.

Series 489 is a durable polymer concrete which exhibits fast curing and minimal shrinkage. Ideal for the rehabilitation of severely eroded concrete or for the corrosion-proofing of new concrete where superior chemical resistance is required throughout the complete topping system. Series 489 is ideal for pump and pad rebuilds in areas of strong acid and caustic exposure. Use to cast sumps and trenches off-site for time and labor savings.

Series V530 | Omnithane

• Uses Primer and/or Block Fillers, Top and Finish Coats
• For Steel
• Generic Description Moisture-Cured Aromatic Urethane
• Finish Matte

Aluminum pigmented primer or finish for marginally cleaned steel. Provides excellent abrasion-, moisture-, chemical- and corrosion-resistance. Suitable for use as a topcoat where an aluminum finish is desired. Topcoating provides enhancement of systems and more latitude with color. Compatible with aged coatings, but verify with test patch.

Series 740 | UVX

• Uses Top and Finish Coats
• For Steel, Concrete, Other
• Generic Description Modified Polycarbamide
• Finish Gloss

An advanced technology finish coat combining low VOC with exceptional performance. Offers superior color and gloss retention compared to traditional polyurethanes for long-term aesthetics on a wide range of exterior structures. Durable film stands up to abrasion and exterior weathering. Very good brush, roll and spray application characteristics. Direct-to-Metal capability allows for a labor-saving, high-build, single coat application. NOT FOR IMMERSION SERVICE.

Series 750 | UVX

• Uses Top and Finish Coats
• For Steel, Concrete, Other
• Generic Description Modified Polycarbamide
• Finish Semi-gloss

An advanced technology finish coat combining low VOC with exceptional performance. Offers superior color and gloss retention compared to traditional polyurethanes for long-term aesthetics on a wide range of exterior structures. Durable film stands up to exterior weathering. Very good brush, roll and spray application characteristics. Direct-to-Metal capability allows for a labor-saving, high-build, single coat application. NOT FOR IMMERSION SERVICE.

Series 945 | Aerolon Tape

• Uses Insulating
• For DryWall and Gypsum, Steel, Concrete, Other, Ductile Iron, Pipes & Fittings
• Generic Description Insulative Tape, Self-adhesive

An innovative, self-adhesive thermally insulative tape that contains a proprietary blend of insulative particles for exceptionally low thermal conductivity. Excellent for controlling condensation and providing thermal efficiency on processing equipment such as tanks, pipes, and valves. It is also a highly effective thermal break for mitigating condensation on architectural components which transmit outside temperatures through the building envelope. Series 945 Aerolon Tape is available in multiple widths that are 30 feet long and 1.5 mm thick. It can be applied in multiple layers to achieve desired thickness.

Series 971 | Aerolon Acrylic

• Uses Insulating
• For Steel, Masonry & Stucco, Concrete, Other, Ductile Iron, Pipes & Fittings
• Generic Description Fluid-applied acrylic insulation coating
• Finish Matte

An innovative, fluid-applied, thermal insulating coating utilizing aerogel particles that imparts exceptional insulative properties to a variety of substrates. Ideal for insulating pipes, valves, tanks, structural steel, or other substrates where thermal improvement or personnel protection is desired. Part of a durable, corrosion-resistant coating system that bonds to the substrate, greatly reducing the issues associated with corrosion under insulation (CUI) and mitigating thermal bridging by controlling condensation.

Series 1026 | Enduratone

• Uses Intermediate Coats, Top and Finish Coats
• For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete
• Generic Description Acrylic Emulsion
• Finish Matte

A durable, easy-to-use, water-based acrylic coating that offers long-wearing protection to a variety of substrates. Excellent as a topcoat or intermediate-coat on anti-corrosive steel coating systems or when applied to concrete and drywall. Easy to apply by brush, roller, and spray, this product’s low odor and low VOC qualities make it versatile choice on architectural and industrial projects. Note: Application methods include “dry-fall” under certain conditions (see application).

Series 1028 | Enduratone

• Uses Intermediate Coats, Top and Finish Coats
• For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
• Generic Description HDP Acrylic Polymer
• Finish Gloss - *Note:* Final gloss level of topcoat can vary depending on number of coats applied. One coat will generally result in a lower sheen than two coats of the material.

Water-based, low VOC, High Dispersion Pure acrylic polymer coating providing excellent long term protection in both interior/exterior exposures. May be applied by spray, brush or roller over a variety of solvent and waterborne steel primers. May also be used over many aged coatings. It is mildew resistant and exhibits very good gloss and color stability. Series 1028 can be used for light duty wall surfaces in water treatment and pharmaceutical environments. Application methods include "dry-fall" under certain conditions (See Application). Note: Series 1028's "dry-fall" characteristics help to reduce the potential for overspray problems on buildings and surrounding property.

Series 1028T | Enduratone

• Uses Insulating, Top and Finish Coats
• For Steel
• Generic Description HDP Acrylic Polymer
• Finish Gloss - *Note:* Final gloss level of topcoat can vary depending on number of coats applied. One coat will generally result in a lower sheen than two coats of the material.

Water-based, low VOC, High Dispersion Pure acrylic polymer coating providing excellent long term protection in both interior/exterior exposures. Contains ceramic spheres for enhanced thermal stability. May be applied by spray, brush or roller over Aerolon insulative coating systems. It is mildew resistant and exhibits very good gloss and color stability.

Series 1029 | Enduratone

• Uses Intermediate Coats, Top and Finish Coats
• For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
• Generic Description HDP Acrylic Polymer
• Finish Low semi-gloss - *Note:* Final gloss level of topcoat can vary depending on number of coats applied. One coat will generally result in a lower sheen than two coats of the material.

Water-based, low VOC, High Dispersion Pure acrylic polymer coating providing excellent long term protection in both interior/exterior exposures. May be applied by spray, brush or roller over a variety of solvent and waterborne steel primers. May also be used over many aged coatings. It is mildew resistant and exhibits very good gloss and color stability. Series 1028 can be used for light duty wall surfaces in water treatment and pharmaceutical environments. Application methods include "dry-fall" under certain conditions (See Application). Note: Series 1029's "dry-fall" characteristics help reduce the potential for overspray problems on buildings and surrounding property.

Series 1070 | Fluoronar

• Uses Top and Finish Coats
• For Steel, Concrete, Other
• Generic Description Advanced Thermoset Solution Fluoropolymer
• Finish Gloss

A high-solids fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and conventional spray application. It has outstanding color and gloss retention even in the most severe exposures. Under certain conditions, it may be used to restore aged fluoropolymer coil applied coatings or for OEM applications. Contact Tnemec Technical Services or your local Tnemec representative for details.

Series 1070V | Fluoronar

• Uses Top and Finish Coats
• For Steel, Concrete, Other
• Generic Description Advanced Thermoset Solution Fluoropolymer
• Finish Gloss

A low VOC, fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and conventional spray application. It has outstanding color and gloss retention even in the most severe exposures. Under certain conditions, it may be used to restore aged fluoropolymer coil applied coatings or for OEM applications. Contact Tnemec Technical Services or your local Tnemec representative for details.

Series 1071 | Fluoronar

• Uses Top and Finish Coats
• For Steel, Concrete, Other
• Generic Description Advanced Thermoset Solution Fluoropolymer
• Finish Semi-gloss

A high-solids fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and conventional spray application. It has outstanding color and gloss retention even in the most severe exposures. Under certain conditions, it may be used to restore aged fluoropolymer coil applied coatings. Contact Tnemec Technical Services or your local Tnemec representative for details.

Series 1071V | Fluoronar

• Uses Top and Finish Coats
• For Steel, Concrete, Other
• Generic Description Advanced Thermoset Solution Fluoropolymer
• Finish Semi-Gloss

A low VOC, fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and conventional spray application. It has outstanding color and gloss retention even in the most severe exposures. Under certain conditions, it may be used to restore aged fluoropolymer coil applied coatings or for OEM applications. Contact Tnemec Technical Services or your local Tnemec representative for details.

Series 1072 | Fluoronar

• Uses Top and Finish Coats
• For Steel, Concrete, Other
• Generic Description Advanced Thermoset Solution Fluoropolymer
• Finish Satin

A high-solids fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and conventional spray application. It has outstanding color and gloss retention even in the most severe exposures. Under certain conditions, it may be used to restore aged fluoropolymer coil applied coatings. Contact Tnemec Technical Services or your local Tnemec representative for details.

Series 1072V | Fluoronar

• Uses Top and Finish Coats
• For Steel, Concrete, Other
• Generic Description Advanced Thermoset Solution Fluoropolymer
• Finish Satin

A low VOC, fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and conventional spray application. It has outstanding color and gloss retention even in the most severe exposures. Under certain conditions, it may be used to restore aged fluoropolymer coil applied coatings or for OEM applications. Contact Tnemec Technical Services or your local Tnemec representative for details.

Series 1074 | Endura-Shield II

• Uses Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Aliphatic Acrylic Polyurethane
• Finish Gloss

A coating highly resistant to abrasion, wet conditions, corrosive fumes and exterior weathering. High build quality combines with project specific primers for two-coat, labor saving systems. Fast curing options are available; see Curing Time below. NOT FOR IMMERSION SERVICE.

Series 1074U | Endura-Shield II

• Uses Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Aliphatic Acrylic Polyurethane
• Finish Gloss

A coating highly resistant to abrasion, wet conditions, corrosive fumes and exterior weathering. High build quality combines with project specific primers for two-coat, labor saving systems. Contains a blend of ultra-violet light (UV) absorbers for enhanced color and gloss retention. Fast curing options are available; see Curing Time below. NOT FOR IMMERSION SERVICE.

Series 1075 | Endura-Shield II

• Uses Intermediate Coats, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Aliphatic Acrylic Polyurethane
• Finish Semi-gloss

A coating highly resistant to abrasion, wet conditions, corrosive fumes and exterior weathering. High build quality combines with project specific primers for two-coat, labor saving systems. Fast curing options are available; see Curing Time below. Product has some applications as a direct to metal finish. Contact your Tnemec representative for more details. NOT FOR IMMERSION SERVICE.

Series 1075U | Endura-Shield II

• Uses Intermediate Coats, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Aliphatic Acrylic Polyurethane
• Finish Semi-gloss

A coating highly resistant to abrasion, wet conditions, corrosive fumes and exterior weathering. High build quality combines with project specific primers for two-coat, labor saving systems. Contains a blend of ultraviolet (UV) light absorbers for enhanced color and gloss retention. Fast curing options are available; see Curing Time below. Product has some applications as a direct to metal finish. Contact your Tnemec representative for more details. NOT FOR IMMERSION SERVICE.

Series 1095 | Endura-Shield

• Uses Intermediate Coats, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Aliphatic Acrylic Polyurethane
• Finish Semi-gloss

A user friendly, low VOC, aliphatic polyurethane coating that provides excellent color and gloss retention for exterior applications to steel, concrete and other substrates in commercial, industrial, and marine environments. Direct-to-Metal capability allows for a labor-saving, high-build, single coat application.

Series 1096 | Endura-Shield

• Generic Description Aliphatic Acrylic Polyurethane
• Finish Eggshell

A user friendly, low VOC, aliphatic polyurethane coating that provides excellent color and gloss retention for exterior applications to steel, concrete and other substrates in commercial, industrial, and marine environments. Can be applied by brush, roller or spray. Direct-to-Metal capability allows for a labor-saving, high-build, single coat application.

Series 1224 | Epoxoline WB

• Uses Primer and/or Block Fillers
• For Steel, Other
• Generic Description Inorganic Hybrid Water-Based Epoxy
• Finish Flat

An advanced generation, low odor, low VOC, water-based epoxy coating featuring HydroLink curing technology for exceptional durability and corrosion resistance. Used as a primer or intermediate coat on structural steel, infrastructure, institutional, and architectural applications. Offers superior wetting for marginally prepared steel and tightly adhered existing coatings. This coating is ideally suited for steel fabrication and OEM applications, with fast-curing and rapid-handling properties. Excellent resistance to yellowing and chalking when exposed to UV and an extended recoat window make it a versatile choice. Its high-performance formulation offers excellent adhesion and provides exceptional protection up to 400°F (204°C). Formula protected under U.S. patent. Note: This product is a direct replacement for Series 27WB Typoxy.

Series 1254 | EpoxoBlock WB

• Uses Primer and/or Block Fillers
• For Masonry & Stucco, Concrete
• Generic Description Inorganic Hybrid Water-Based Epoxy
• Finish Flat

An advanced generation, low odor, low VOC, high solids, water-based epoxy coating for filling surface voids in porous concrete and masonry block in interior and exterior environments. Provides high bond strength, fast curing, and rapid overcoating capabilities and can be topcoated with a variety of water- and solvent-based coatings.

Series 1402 | ProPolymer

• Uses FDA, Linings & Secondary Containment
• For Steel, Concrete
• Generic Description Elevated Temperature Vinyl Ester
• Finish Gloss

Series 1402 is a food grade, vinyl ester primer for complete FDA-compliant lining systems in concrete, steel or stainless-steel tanks. Fast-cure characteristics allow for quick application of subsequent coats, limiting downtime and facility disruption. Series 1402 is the only approved primer for the ProPolymer food grade product line. Replaces ProPolymer 4808.

Series 1407 | Vinester

• Uses Primer and/or Block Fillers
• For Steel, Concrete
• Generic Description Flexible Vinyl Ester
• Finish Gloss

Series 1407 is a specially formulated primer with flexible properties designed for use on concrete and steel substrates. Series 1407 may be used under a wide-range of Tnemec vinyl ester intermediate and finish coats with the exception of direct food contact systems. Replaces ProPolymer 4805.

Series 1415 | Vinester

• Uses Linings & Secondary Containment
• For Steel, Concrete
• Generic Description Epoxy Vinyl Ester
• Finish Semi-gloss

This corrosion resistant resin is used as the base product for many reinforced applications due to the versatility provided from the product being supplied as “neat” or non-pigmented. A versatile selection for many secondary containments and process floors, Series 1415 is best for caustic and high-ph applications, and when used as the base material for silica-free systems. Use with specialty mortar powders, to embed glass mats, as a saturant coat or as a pigmented self-leveling finish coat. Series 1415 was formerly ProPolymer 4860.

Series 1416 | Vinester

• Uses Linings & Secondary Containment
• For Steel, Concrete
• Generic Description Novolac Vinyl Ester
• Finish Semi-gloss

This extremely corrosion resistant coating is used as the base product for many reinforced applications due to the versatility provided from the product being supplied as “neat” or non-pigmented. Series 1416 is the best selection for strong acid conditions and when temperatures above ambient conditions are expected. Use this product to add specialty mortar powders, to embed glass mats, as a saturant coat, or as a pigmented self-leveling finish coat. Combine with LavaCrete Part C aggregate to create an enhanced corrosion resistant polymer concrete. Series 1416 was formerly ProPolymer 4847.

Series 1418 | Vinester

• Uses Linings & Secondary Containment
• For Steel, Concrete
• Generic Description High Temperature Novolac Vinyl Ester
• Finish Semi-gloss

Resistant to very high temperature service and extremely corrosive environments, this coating is used as the base product for many reinforced applications due to the versatility provided from the product being supplied as "neat" or non-pigmented. Series 1418 is the recommended selection for use in the most chemically demanding environments, such as, wet or dry FGD scrubbers, ductwork and slurry tanks operating in elevated temperature conditions. Use with specialty mortar powders, to embed glass mats, as a saturant coat or as a pigmented self-leveling finish coat. Series 1418 was formally ProPolymer 4847HT.

Series 1420 | ProPolymer

• Uses FDA, Linings & Secondary Containment
• For Steel, Concrete
• Generic Description Epoxy Vinyl Ester
• Finish Matte

Series 1420 is an FDA-compliant, trowel-grade vinyl ester lining suitable for direct-food contact in tanks and vessels. Glass-flake reinforcement provides additional abrasion and permeation resistance in wet slurry or immersion service environments. Series 1420 may be used as a stand-alone lining system or with a gel coat in a multi-coat system. Replaces ProPolymer 4855T.

Series 1422 | ProPolymer

• Uses FDA, Linings & Secondary Containment
• For Steel, Concrete
• Generic Description Elevated Temperature Epoxy Vinyl Ester
• Finish Semi-gloss

Series 1422 is an FDA-compliant, trowel-grade, high temperature lining suitable for tanks and vessels in food grade service environments or where high temperature conditions are required. Highly filled with glass-flake, it is specially formulated for exceptional service in thermal cycling and chemical reaction vessels. Replaces ProPolymer 4865T.

Series 1428 | Vinester

• Uses Linings & Secondary Containment
• For Steel, Concrete
• Generic Description Novolac Vinyl Ester
• Finish Semi-gloss

An enhanced elevated temperature, novolac vinyl ester, filled with specially treated premium glass flakes. This product has outstanding trowel application properties. Series 1428 is ideal for the rehabilitation of heavily corroded steel substrates and for high film build protection in the most demanding chemically active and corrosive environments. Series 1428 can be used in FGD units for time saving, quick repairs on small areas or used as a complete lining. Formerly ProPolymer 4875T.

Series 1430 | ProPolymer

• Uses FDA, Linings & Secondary Containment
• For Steel, Concrete
• Generic Description Epoxy Vinyl Ester
• Finish Semi-gloss

Series 1430 is an FDA-compliant, mineral flake-filled vinyl ester lining for food grade tanks, vessels and other structures. Applied by spray or roller, it can be used as either a stand-alone lining system or as a topcoat for added protection over trowel applied vinyl ester linings. Replaces ProPolymer 4813S.

Series 1432 | ProPolymer

• Uses FDA, Linings & Secondary Containment
• For Steel, Concrete
• Generic Description Elevated Temperature Epoxy Vinyl Ester
• Finish Semi-gloss

Series 1432 is an FDA-compliant, vinyl ester lining for food grade tanks, vessels and other structures. Highly filled with glass flake, Series 1432 is specially formulated to provide exceptional service in thermal cycling and chemical reaction tanks and vessels. Applied by roller or spray, it may be used as a stand-alone lining system or as a topcoat for added protection over trowel applied vinyl ester linings. Replaces ProPolymer 4822S.

Series 1436 | Vinester

• Uses Linings & Secondary Containment
• For Steel
• Generic Description Epoxy Novolac Vinyl Ester
• Finish Semi-gloss

A high molecular weight (HMW), elevated temperature-service, glass-flake-filled novolac vinyl ester lining. Can be used as a gel coat, as a stand-alone liner or as part of a full vinyl ester system. Commonly used in high temperature filtration units, bag houses, exhaust and duct work, and as a primary lining for wet chemical services. Formerly ProPolymer 4834S.

Series 1438 | Vinester

• Uses Linings & Secondary Containment
• For Steel
• Generic Description Novolac Vinyl Ester
• Finish Semi-gloss

A high-build, novolac vinyl ester, glass-flake filled lining with an enhanced elevated temperature resistance in dry and wet corrosive environments. Series 1438 is ideal for use in flue gas desulfurization (FGD) units, hot duct work, and wet and dry absorbers. Also an outstanding primary lining for many challenging chemical immersion services. Formerly ProPolymer 4844S.

Series 1439 | Vinester

• Uses Linings & Secondary Containment
• For Steel
• Generic Description Abrasion Resistant Novolac Vinyl Ester
• Finish Semi-gloss

An elevated temperature service, high-build novolac vinyl ester, with a proprietary blend of abrasion resistant powders and ceramics. Series 1439 is ideal for use in high wear, high air velocity with heavy particulate suspension and on impingement areas. Series 1439 is an outstanding selection for use in abrasive slurry lining services. Formerly ProPolymer 4844SAR.